China Naming Network - Eight-character fortune telling - Is the wall brick in the bathroom 1200*600 pasted horizontally or directly?

Is the wall brick in the bathroom 1200*600 pasted horizontally or directly?

In recent years, more and more 600* 1200 tiles are pasted on the wall. So, is the bathroom wall tile horizontal or vertical? Today, Bian Xiao will introduce these two paving methods. You will understand after reading it. Interested friends come and have a look.

Characteristics of 600* 1200 tiles as horizontal stickers

1 and 600* 1200 tiles are pasted horizontally. Although there is nothing wrong, it is too traditional and there is no bright spot. After thinking about it, the specification of large brick for early wall plastering started from 600*600, then developed to 800*800, and now it is 600* 1200. 600* 1200 tiles are placed horizontally, and there is also a brick joint every 60 cm high. So there is no difference between horizontal seam and 600*600 tile, but there is one less vertical seam than 600*600 tile. On the whole, it is more like an upgraded version of 600*600 tiles, and does not reflect the advantages of 600* 1200 tiles.

2.600* 1200 tiles are laid horizontally, visually raising the lower floor.

Suggestions on 600* 1200 tile horizontal pasting

Although Hengdian has no special features, there are actually many friends who choose this way. If you plan to spread horizontally, I suggest:

1, try to leave one-way brick joints.

Leaving one-way brick joint means that one horizontal joint and one vertical joint can be left, and the brick joint in the other direction can be closed. The general practice is to leave a gap in the horizontal seam, make a beautiful seam about 2.5mm, and make a tight seam in the vertical seam.

The reason for this is that it can reduce the existence of brick joints, and it can also be decorated with brick joints to avoid the monotony of the wall, and the effect will be better. If it is a two-way joint, there are too many brick joints, which does not reflect the sense of design.

2. The top of the transverse brick joint should not be too close to the ceiling.

For example, your half-hanging height is 2.4 meters, and it can be achieved by using horizontal stickers with the height of 4 full bricks, and the effect is better. However, in case your semi-trailer height is 2.5 meters, when you finish paving the last brick, you will find a brick crack under the ceiling 10 cm. If so, it will affect the decorative effect.

The solution is to leave the height of 10 cm at the lower part, that is, lay a brick with the height of 10 cm first, and then lay the whole brick in sequence, so that the effect will be better.

Characteristics of 600* 1200 tiles as vertical stickers

Compared with horizontal paste, vertical paste can better reflect the characteristics of 600* 1200 brick, which is relatively fresh and has a sense of design. Moreover, vertical stickers can also visually stretch the height, making the whole look more breathable.

But vertical stickers are not without problems. In addition to paying attention to the horizontal brick seam at the top as a horizontal sticker, there is another detail to pay attention to.

For the height of a flat floor, it is generally enough to stick two tiles of 600* 1200 vertically. However, this will lead to brick cracks at the waist of the wall. Moreover, this position can be said to be the golden position of the wall, and it is not good to have brick joints in this position alone.

600* 1200 Tile Vertical Sticking Suggestion

In order to make the brick joint leave the golden position of the wall and make the brick joint have a sense of design. If 600* 1200 tiles are pasted vertically, we can consider cutting a whole tile into two 600*600 processed tiles. When plastering the wall, first stick a brick of 600*600 below, then stick a brick of 600* 1200 above, and finally stick a brick of 600*600.

In this way, there will be no brick joints at the waist of the wall, and the brick joints also have a sense of design and look more harmonious. It should be noted that the vertical brick joints should be sealed by this pasting method to highlight the upper and lower decorative trunking.

The above is "Suggestions on horizontally or directly pasting 1200*600 wall tiles in the bathroom".