Factory door dimensions

What is the size of the general factory gate? About 7 to 8 meters

What is the importance of the size of the factory gate? Iluban ruler gate light star is determined.

What is the appropriate size of the factory gate for Feng Shui? In the factory, there are several gates for entry and exit, with no priority, or the walls are irregular and have gaps, which is also a sign of chaos. In addition, for example, if the passages in a company or factory are not clear, turning left or right can easily lead to unclear Qi collection in Feng Shui, which is a taboo.

There is a large east-west road in front of the door, which is more convenient for travel (it has a transportation advantage). For the convenience of transportation, Boss Cheng (the factory owner) opened the door of the factory due north and built a small road by himself. , can lead directly to the factory, making it easier to enter the car. Of course, this original intention must also be for the benefit of the factory, but this unintentional move violated a taboo in Feng Shui: "The gate conflicts with the main office building" ( Not good for the owner), not to mention seeking wealth. The conflict between the main door and the main office building is not only not conducive to seeking wealth, but also indicates the loss of wealth.

The factory gate faces an upward slope, and steps are added outside the gate to ease the water flow. After the water flow weakens, it will not cause disaster. However, it should be remembered that it is not appropriate to have an even number on the platform. It is auspicious to use an odd number, such as three levels, five levels, etc.; or place a Guan Gong at the entrance of the gate to resolve the evil spirits.

Factory doors include fire doors, Class A fire doors, Class B fire doors, wooden fire doors, steel fire doors, glass fire doors, security doors, factory sliding doors, garage doors, rolling shutter doors, etc., as For factories, the door should match the factory building and the size is too small. For the convenience of transportation of goods and equipment, the size of the factory door should be able to allow container trucks to pass through.

The factory gate cannot be too high. If the door is too high, you will be used to looking upwards when entering and exiting, which may imply that you are vain and flattering, and you may have a high-minded attitude but a low-handedness in handling things. The door lintel is too high, even higher than the ceiling. This pattern will cause the number of people in the home to decrease.

The factory door cannot be too low. If the door is too low, you must bend down and lower your head when entering or exiting. Over time, people will become accustomed to looking downward, and they will choose to lower their heads and give in when encountering strong things. As a result, they will become short-sighted, timid and have low self-esteem, and they will be dependent on others and bullied throughout their lives.

The factory door cannot be too wide. If the door is too wide, it will not be able to hide the wind and gather energy. Not only will the money not be retained, but the people will be separated and the body will become weaker and weaker. If the door is too wide, the elderly at home will feel more troubled.

The factory door should not be too narrow. If the door is too narrow, progress will be uncomfortable and oppressive, your vision will become narrower, and your mind will easily become narrower.

What is the general size of the vertical copper plate hanging on the factory gate? 32*2.2 meters, 35*2.3 meters, 30*2 meters should generally not exceed the length of the board. The width is generally between 30 and 35 centimeters

What is the appropriate size for the factory workshop entrance? It should be at least six meters high. , the width should be based on the size outside the door

There is no standard size for warehouse doors. Doors are generally made with measuring tape and are related to the height of the rolling shutter door. The greater the height, the thicker the diameter required.

Calculate the size:

1. The height of the opening refers to the height of the door opening;

2. The part above the door opening;

3 .The actual width of the rolling shutter door should include the width of the guide rails on both sides;

4. Fire blocking requirements are not considered in the quota.

The size of the warehouse rolling door is mainly determined based on the height and width of the house, because it can actually be made without any restrictions. The height can reach about 9 to 14 meters, and the width It can also be within the range of 4 meters to 12 meters. Generally, the more common garage rolling shutter door size will choose an 80 mm round tube when selecting the shaft diameter, and then determine the usage according to the size of the door. The size of a general small single garage door is about 2.5 meters high and 3 meters wide. When selecting, type 55 or 77 curtains are generally chosen. It is made according to the market size on site, and it is made as large as possible, there are no specifications.

In addition to rolling shutter doors, warehouse doors are mostly sliding doors. They can be one-way or two-way according to the storage space at the door of the building; single or multiple overlapping leaves; generally according to the load-bearing structure of the door, it can be divided into 50yc/information/newsdetail/3170 Determine whether it is a straight line or a combination of straight lines and curves.

How to design the factory gate? How tall and suitable is it generally? The width and height of the factory gate are based on 300 as a module, such as 3.6m*3.6m. It depends on your needs. The width can be within 1800mm. When the size of the wooden door is large, use a steel door. When the aluminum alloy door needs to pass a fully loaded truck, it will be wider by 600- 1000 Heightened by 400-500

According to the fire protection law, the number of doors and the area of ​​the factory are stipulated. Fire regulations stipulate that the number of doors in the factory has nothing to do with the area. No matter how big the factory is, the requirement is no less than two doors, that is, you design Two or more doors will do.

Fire protection regulations have strict requirements on the roads in the factory area and extremely, extremely strict requirements on the layout of the buildings in the factory. This is the key point. The idea of ​​​​fire protection is your own factory, and there is no one at the gate. It should be very small, and the vehicles on the site can enter and exit the fire truck.

I hope this helps. If you have any questions, please feel free to ask. Thank you.

What is the size of the company name on the factory gate? There are no specific regulations;

Depending on the size of the gatehouse and the distance in front of the door, the size of the font size needs to be determined!