China Naming Network - Eight-character fortune telling - How is the automatic washing machine connected to the faucet?

How is the automatic washing machine connected to the faucet?

1. Take out the water inlet pipe fittings of the automatic washing machine, find the end with the water inlet pipe connector, and then press the slider to separate the water inlet pipe connector from the water inlet pipe.

2. Loosen the four screws on the water inlet pipe connector evenly until the faucet can be inserted. If the faucet is too big, you can remove the bushing. Then loosen the plastic joint nut until about 3-4 turns of thread are exposed.

3. Put the water inlet pipe connector on the faucet, stick the black washer in the connector on the faucet, then tighten the screw with a screwdriver and tighten the plastic interface nut until it is watertight.

4. Then connect the water inlet pipe with the water inlet pipe connector, connect the other end of the water inlet pipe with the water inlet of the automatic washing machine, and tighten the plastic nut to complete the device.

Don't forget to turn on the water valve after installation, so that the water will automatically enter when the washing machine starts.

Extended data:

Matters needing attention in connecting the faucet of washing machine

1, it is necessary to pay attention to the connection of ordinary faucets. Some families may reserve an ordinary faucet when decorating. There is no structure connected to the washing machine on this faucet, and the above method is no longer applicable.

2. For this faucet, we need to use the screw interface of the washing machine for assembly, which is a little more complicated. First, we must remove the connecting seat and water inlet pipe from the hose.

At this time, we will find that the connector is fixed with four screws. We turn the connector, loosen the screw on it, and then put it on the faucet.

4. If the faucet has a large diameter, you need to take out the internal plastic pipe. Then we tighten the screws and fix them, and then connect the other end of the hose to the washing machine.

5. The side connected with the faucet is fixed on our connecting seat through the buckle, and then the faucet is turned on for testing. If there is no water seepage, the installation is successful.

Baidu encyclopedia: faucet