A group of six floor heating valves manage which room respectively.

A group of six floor heating valves control which room, and the water separator runs north and south. You can decide for yourself according to the actual situation. Nanyi Road, Bedroom 1, Bedroom 2, Bedroom 3, Kitchen and Bathroom 4, Living Room 5, 6, you will know. For example, your house is about 130 square meters, that is, three rooms and two halls, and a set of geothermal water separators and six circulating pipes are installed respectively.

How to tell which room is the floor heating switch?

The easiest way is to go to the property to ask for plumbing drawings, and you will know at a glance. However, it is usually possible to close all main valves and check valves. After the ground temperature drops, open the main valve and separate the valves of one way, so that you can know which room to control separately. This method takes a long time.

The working principle of floor heating. The circulating hot water is introduced into the heating pipeline loop under the paved floor or floor tile, or the heating cable is directly laid to heat the floor, and the heat is radiated to the space above the floor in a large area through the ground, so that the human body can feel the double thermal effects of thermal radiation and air temperature.

Generally speaking, the floor heating system is divided into large-scale boiler self-heating, wall-hung boiler, gas stove and electronically controlled infrared equipment. , control system distribution manifold, multifunctional filter, backwater check valve, mixing pump, circulating pump, etc. The heat exchange system includes insulation board, radiant paper and fixed steel mesh.