Smart toilet solenoid valve failure

If the solenoid valve of the smart toilet fails, it may prevent normal flushing or stop flushing. The following are some possible causes and solutions:

1. Power supply problem: Check whether the power supply of the smart toilet is connected normally and make sure the power cord is not damaged or not plugged in properly. If there is a battery, check to see if the battery needs to be replaced or recharged.

2. Valve clogged: After long-term use, the solenoid valve may become clogged or accumulate scale, causing it to malfunction. At this point, you can try to turn off the smart toilet and use an appropriate cleaning agent to clean the valve and pipes. If the clog cannot be cleared, the valve may need to be replaced.

3. Solenoid valve failure: If the solenoid valve itself fails, it may not open or close, causing the flushing function to not work properly. In this case, it is best to contact the customer service department of the relevant brand or manufacturer for advice on repairing or replacing the solenoid valve.

It should be noted that the electronic components in smart toilets are relatively complex. If you have any concerns or uncertainties about repairs, it is best to contact professional repair personnel or the manufacturer’s customer service department for appropriate for help and repair advice. Do not disassemble or repair it yourself to avoid causing more problems or safety hazards.