20 19 west Malaysia draw lots
One of the ball games. It is conducted on a table with a horizontal net in the middle, which is 274 cm long and 5 cm wide. 152. The diameter of the ball is 37. 2-38. 2 mm and the weight is 2. 40-2. 53 g.. It is white or yellow, made of celluloid or plastic, and has a ping-pong sound when playing, hence the name. The player stood on one side of the table and hit the ball with a racket. The hitting methods are blocking, drawing, cutting, rubbing and pulling. The ball must bounce off the stage before it can return to the net. It is effective to leave it on the other side's table. The game is divided into one game with 2 1, and the best of three games or the best of five games is adopted. There are several kinds of competitions, such as team competition, singles and doubles.
Origin and development > >
Table tennis originated in England at the end of19th century. It started as an active game. This ball is made of light and elastic material. A wooden board like a cigar box cover hits the table like tennis, so it is called "table tennis". 1900 or so, due to the development of light industry, the ball was changed into a hollow ball made of celluloid. Since then, table tennis has gradually developed. The first large-scale table tennis competition was held in1900+February in London, England. More than 300 people took part in the competition. During the competition, male athletes should wear shirts and starched vests, while female athletes should wear skirts and even hats.
1926, the International Table Tennis Federation was formally established and decided to hold the first World Table Tennis Championships. In the past 50 years, the development of table tennis has gone through three stages. Although the rackets used by early athletes have different shapes, they are all made of wood, and the hitting speed is slow. Small strength, not to mention any rotation; The play is monotonous, just pushing the ball around.
1903, an Englishman Goodall invented the rubber racket, which strongly promoted the development of table tennis technology. From 1926 to 195 1, most players around the world use rubber bats with cylindrical particles on their surfaces. When hitting the ball, the elasticity and friction increase, which can make the ball rotate to a certain extent, so the defensive style of cutting off the rotating ball appears. This style of play has been popular in Europe for a long time, and many athletes have won the world championship with this style of play. The advantage of table tennis in this period was in Europe, among which Hungary scored the most outstanding. 1 17 world champions won 57 or 5 times, accounting for half of the European team. In the early 1950s, the Austrian invented the sponge racket, and the Japanese athletes' morality was used in world competitions, winning four championships in the 19 World Championships in one fell swoop, breaking the monopoly position of European athletes. Because Japanese players used this racket to create a long-range attack style, which has the advantages of strong forehand attack, fast speed and great threat of serve attack, it gradually replaced the defensive style of slow speed, weak rotation and weak attack in Europe, which made Japan win the advantage of table tennis in the 1950 s. From 1952 to 1959, Japan won 24 of the 49 world championships. This is the first big improvement in table tennis.
From 65438 to 0959, after Rong Guotuan won the men's singles championship in the 25th World Table Tennis Championships, China athletes began to enter the international table tennis arena. Gradually formed a "fast, accurate, ruthless, changing" technical style of the fast-break style. In the 26th World Championships of 196 1, China not only broke through Europe, but also defeated the Japanese player who won the secret weapon-"curling ball" and won the men's team world championship for the first time. And won the 27th and 28th men's team championships in succession. The advantage of China's near-table fast break is its close position, high speed, flexible action and free use of forehand and backhand, which is a great progress compared with Japanese long-distance draw. In 1960s, China's table tennis skills were in the forefront of the world, and its advantages were transferred from Japan to China. This is the second big improvement in table tennis.
With the development of table tennis in Japan and China, European athletes have learned from their failures. After nearly 20 years of hard work, they finally created an advanced style of play that suits them, that is, the combination of loop ball and fast break. The representative figures are Hungarian Crampa and Jonel. The combination of fast break and loop ball is based on forehand and backhand fast break as the main technique, backhand fast break as the initiative and forehand loop ball as the scoring means. Representative figures are Gehlsen of Sweden and Olovsky of Czech Republic. These two styles of play are characterized by strong landing point, fast speed, strong pulling and hitting ability, low pulling and high hitting, and large room for manoeuvre. Table tennis has developed to a new height, and its position and speed are closely combined. This is the third big improvement in table tennis.
Since 1970s, due to the strengthening of international exchange and study, various styles of play complement each other, which makes the development and improvement of table tennis technology faster. For example, China's near-table fast break, straight-shot fast break combined with loop ball, and horizontal-shot fast break combined with loop ball have all developed and innovated, and achieved excellent results in international competitions. Now, table tennis has developed into one of the favorite sports of people all over the world. The International Table Tennis Federation also has 127 member associations/one of the largest sports organizations in the world. ITTF and table tennis federations of all continents have organized numerous world championships, World Cups, intercontinental competitions and international competitions of all sizes and forms. From 1982 to 1988, the decision of the international Olympic Committee to list table tennis as an official Olympic event will surely attract more attention from all countries in the world and promote the faster development of table tennis.
1. 1 desktop
1. 1. 1 The upper surface of the table is called a game table, which should be a rectangle parallel to the horizontal plane, with a length of 274m, a width of 1.525m and a height of 76cm in the highland direction.
1. 1.2 The desktop does not include the sides of the desktop.
1. 1.3 The game table can be made of any material and should have consistent elasticity, that is, when the standard ball falls to the table from a height of 30 cm, the rebound height should be about 23 cm.
1. 1.4 The table top should be dark and dull, with a white edge line with a width of 2cm along the edge of each 2.74m competition interface and a white end line with a width of 2cm along the edge of each1.525m competition table top.
1. 1.5 The playing table is divided into two equal table areas by a vertical net parallel to the end line, and the whole area of each table area should be a whole.
In 1. 1.6 doubles, each table area should be divided into two equal "half areas" with a white middle line with a width of 3 mm. The midline is parallel to the sideline and should be regarded as a part of the right half.
1.2 network equipment
1.2. 1 The net device includes a net, a net hanging rope, a net post and a clip part for fixing them on the table.
1.2.2 The net should be hung on a rope, and both ends of the rope should be tied to an upright net column with a height of 15.25 cm, and the distance from the outer edge of the net column to the outer edge of the sideline is 15.25 cm.
1.2.3 distance from the top of the whole net to the table15.25cm.
1.2.4 The bottom of the whole net should be as close to the table as possible, and both ends should be as close to the net posts as possible.
1.3 ball 0 top
1.3. 1 The ball shall be spherical with a diameter of 38mm.
1.3.2 The ball weighs 2.5g ..
1.3.3 The ball should be celluloid or similar material, white, yellow or orange, and dull.
1.4 racket top
1.4. 1 The size, shape and weight of the racket are not limited, but the bottom plate should be flat and hard.
1.4.2 The thickness of the bottom plate should be at least 85% of the natural wood, and the adhesive layer for strengthening the bottom plate can be made of fiber materials such as carbon fiber, glass fiber or compressed paper, and each adhesive layer should not exceed 7.5% or 0.35 mm of the total thickness of the bottom plate.
1.4.3 The racket face used for hitting the ball should be covered with a layer of ordinary granular glue with outward particles, and the thickness of the glue should not exceed 2mm or covered with sponge glue with inward or outward particles, together with adhesive, and the thickness should not exceed 4 mm.
1.4.3. 1 "Ordinary granular rubber" is a layer of natural rubber or synthetic rubber without foam, and its particles must be distributed on the whole surface, with an average density of not less than 10/cm2 and not more than 50 particles.
1.4.3.2 "Sponge rubber" means that a layer of foam rubber is covered with a layer of ordinary granular rubber, and the thickness of ordinary granular rubber is less than 2mm.
1.4.4 The covering should cover the whole racket face, but not beyond its edge. The portion near the handle and the finger grip portion may not be covered, or may be covered with any material.
1.4.5 The bottom plate, any interlayer, covering layer and adhesive layer in the bottom plate shall be a whole with uniform thickness.
1.4.6 Both sides of the racket, whether covered or not, must be dull, one bright red and the other black. The edge of the racket should be blunt, not white.
1.4.7 Due to accidental damage, wear or fading, the integrity and color consistency of the racket face are slightly different. It can be used as long as the racket face performance has not changed significantly.
1.4.8 When an athlete needs to change his racket at the beginning and during the competition, he must show his opponent and the referee the racket he will use and allow them to check it.
1.5 defines the top of the term.
1.5. 1 "round": a period of time during which the ball is in the game.
1.5.2 "The state of the game when the ball is served". From the time of serving, the ball stands still for a moment without clapping its hands before intentionally throwing it upward. Score or serve again in this round.
1.5.3 "serve again": there is no score in the round.
1.5.4 "one point": this round scores.
1.5.5 "Clap your hands": the hand holding the racket.
1.5.6 "Don't be afraid of the hand": the hand that doesn't hold the racket.
1.5.7 "Hit the ball", touch the ball with the racket held in your hand or below your wrist.
1.5.8 "Blocking": After the opponent hits the ball, the ball in the game state does not touch his own table or exceeds the table or its end line, that is, it touches his own player or anything he wears.
1.5.9 "server": the first player to hit the ball in a round.
Receiver: The second player to hit the ball in a round.
1.5. 1 1 "referee: a person appointed to manage a game,
1.5. 12 "referee assistant": a person designated to assist the referee in some aspects.
1.5. 13 Anything an athlete "wears or brings", including anything he wears or brings at the beginning of a round.
1.5. 14 The ball that passes under or outside the net outside the protruding table, or returns after passing through the net, shall be regarded as having "passed or bypassed" the net.
The "terminal line" in table 1.5. 15 includes infinite extension lines at both ends of the terminal line.
1.6 legal service top
1.6. 1 When serving, put the ball on the palm of your hand. Don't clap your hands. Keep your palms open and flat. The ball should be static, behind the server's end line and above the game level.
1.6.2 The starter must throw the ball almost vertically upward by hand, and must not make the ball rotate, so that the ball will rise not less than 16 cm after leaving the palm of his hand without clapping his hands.
1.6.3 When the ball falls from the highest throwing point, the server can hit the ball so that the ball touches its own court first, then goes over or bypasses the net, and then touches the court of the receiver. In doubles, the ball should touch the right half of the server and receiver.
1.6.4 From the last moment when the ball is still before pitching to hitting the ball, the ball and racket should be above the level of the table.
1.6.5 When hitting the ball, the ball should be behind the end line of the server, but it should not exceed the farthest part of the server's body from the end line (except the arm, head or leg).
1.6.6 When an athlete serves, it is his responsibility to let the referee or assistant referee see if he serves according to the statutory provisions.
1.6.6. 1 If the referee doubts the correctness of a service action of the server, and neither he nor the assistant referee is convinced that the service action is illegal, the referee can warn the server not to score when this phenomenon occurs for the first time in a game.
1.6.6.2 In the same game, if the correctness of a player's service is questioned again, whether for the same reason or not, he will lose a point without warning.
1.6.6.3 No matter whether it is the first time or at any time, as long as the server obviously fails to serve according to the legal provisions, he will be deducted one point without warning.
1.6.7 When an athlete can't strictly abide by some provisions of the statutory service due to physical injury, the referee may make a decision to waive the execution, but he must explain it to the referee before the game.
1.7 legal counterattack
1.7. 1 After the opponent serves or returns the ball, the players of our team must hit the ball so that it directly crosses or bypasses the net, or touches the net, and then touches the opponent's table.
1.8 Top few in the competition order
1.8. 1 singles, legal serve, starting, then receiving the serve, receiving the serve and legally counterattacking, and then alternately legally counterattacking.
1.8.2 In doubles, legal serve, the server, then the receiver and the server legally counterattacked, and then the server and the receiver legally counterattacked. After that, players will take turns to fight back legally in this order.
1.9 serve the game again.
In the round of 1.9. 1, the service shall be awarded again in the following cases:
1.9. 1. 1 If the ball sent by the server touches the net device when it crosses or bypasses the net device, it becomes a legal serve or is blocked by the receiver or his companions.
1.9. 1.2 If the receiver or companion is not ready, the ball has already served: and neither the receiver nor the companion tries to hit the ball.
1.9. 1.3 The athletes failed to go to legal serve due to uncontrollable interference. Fight back legally or obey the rules.
1.9. 1.4 The referee or deputy referee suspended the game.
1.9. 1.5 In doubles, the player made a mistake in serving and receiving the service.
1.9.2 The game can be paused under the following circumstances:
1.9.2. 1 due to the need to correct the wrong order or orientation of serving and receiving;
1.9.2.2 Due to the rotating service mode;
1.9.2.3 to warn or punish athletes;
1.9.2.4 The results of this round may be affected by the interference of the competition environment.
1. 10 Yidianding
1. 1O. 1 Except for the round in which the serve is judged to be heavy, the player will score one point under the following circumstances:
1.10.1.1The opposing player failed to legal serve;
1. 1O. 1.2 The opposing athlete failed to fight back legally;
1. 1O. 1.3 After the player serves or returns the ball, the ball touches anything except the net before the opponent hits the ball;
1. 10. 1.4 After the opponent hits the ball, the ball crosses his own end line and does not touch his own platform;
1. 10. 1.5 was blocked by the other party;
1. 10. 1.6 combo;
1. 10. 1.7 The opponent hits the ball with a racket face that does not meet the requirements of 1.4.3;
1. 10. 1.8 The opposing player or any player he wears moves the table;
1. 10. 1.9 The opposing player or anything he wears touches the net;
1.10.1.10 The opposing player does not clap his hands when touching the table;
In1.10.1.1doubles, the opposing players hit the ball in the wrong order;
1.10.1.12 When the serve rotation method is implemented, the receiver or his doubles partner, including receiving the serve, completes 13 legal counterattacks.
1. 1 1 game top
1.11.1In a game, the winner is the one who scores 2 1 points first, and the winner is the one who scores 2 points first after 20 draws.
1. 12 one game.
1. 12. 1 A game should be best of three or best of five.
1. 12.2 A game should be played continuously. However, during the competition, any athlete has the right to ask for a break of no more than two minutes.
1. 13 serve, according to serve and heading.
1. 13. 1 Select serve, receive and our own side. The strength of which side should be decided by drawing lots. The winner can choose to serve or receive the service first, or he can choose to stand aside first.
1. 13.2 when one player chooses to serve or receive the service first, or to stand aside first, the other player should have another choice.
1. 13.3 After each score of five points, the receiver becomes the server, and so on, until the end of the game, or until both sides score 20 points or the rotation service method is implemented. At this time, the order of serving and receiving remains unchanged, but each person only serves one point in turn.
1. 13.4 In the first game of doubles, the server determines the starter first, and then the receiver determines the receiver first. In subsequent matches, after the first receiver is determined, the first receiver should be the player who served for him in the previous match.
1. 13.5 In doubles, every time the service is changed, the front-end server becomes the server, and the partner of the front-end server becomes the receiver.
1. 13.6 The player who serves first in one game should receive the service first in the next game. In the final game of doubles, when one player wins 10 first, the receiver will exchange the order of receiving the service.
In the game of 1. 13.7, the player in one direction has to switch to the other direction in the next game. In the deciding game, one side wins 10, and the two sides exchange directions.
1. 14 The order and orientation of serving and receiving are wrong.
1. 14. 1 The referee shall immediately suspend the game and serve or receive the service according to the order established at the beginning of the game and the score on the field; In doubles, when mistakes are found, they should be corrected in the order established by the side with the right to serve first, and the game will continue.
1. 14.2 once the referee finds that the players should exchange positions but not exchange positions, he should immediately suspend the game and make corrections according to the correct position where the players should stand at the beginning of the game before continuing the game.
1. 14.3 In any case, all scores before the error is found are valid.
1. 15 rotating tee
1. 15. 1 If a game is not over after 15 minutes (except when both sides score at least 19), or if both players ask for it at any time before that, the rotation service method should be implemented.
When the time limit is 1. 15. 1, the ball is still in the game state, and the referee shall immediately suspend the game. The suspended server serves and continues the game.
1. 15. 1.2 At that time, the ball was not in the game state, and the last round of service and service should be served to continue the game.
After 1. 15.2, each player serves one point in turn until the end of the game. If the receiver makes 13 legal counterattacks, the receiver gets 1 point.
Once the service change method of 1. 15.3 is implemented, the rest of the game must continue to be executed until the end of the game.
The order of the top players before the team competition
Men's and women's team competitions all adopt the same order.
That is, each team can register 3-5 people and play 3 people. One game is best of five, and one game is best of three.
Before the start of a game, the captains of both sides draw lots to decide which side is A, B, C or X, Y and Z, and then the captains of both sides hand over the rankings of their respective athletes to the referee.
The specific competition order is:
1, a to x
2.b versus y
3.c versus Z.
4.a versus y
5.b versus X.
Competition schedule
Competition arrangement
Section 1 Competition Order and Team Events
I. Competition Table tennis competition consists of seven events: men's team, women's team, men's singles, women's singles, men's doubles, women's doubles and mixed doubles.
Second, team competition.
(1) The men's team competition consists of three players and a team leader (who can be part-time or full-time) selected from a team. Before the game, the captains of both sides will draw lots to decide the choice of A, B, C and X, Y and Z, and submit a team list to the referee, and each player will be assigned a letter.
The current competition order: the first A-X; The second game b-y; Game 3, C-Z, Game 4, A-Y, Game 5, B-X X X, each game is the best of three games. When a team wins three individual games, the game should be a draw.
(2) Women's team competition
According to the spirit of the resolution adopted by the ITTF Congress held during the 43rd World Table Tennis Championships, with the approval of ITTF, the women's team competition mode adopted in men's competition, that is, the third doubles of the original women's team competition was changed to singles. The competition order of this year's women's team competition is: the first A-X; The second game b-y; The third game is C-Z; Game 4 a-y, game 5 B-X X
Section 2 Table Tennis Competition Methods
There are two common methods in table tennis: single round robin and elimination. If these two methods are combined, it is called mixed system. The choice of competition mode depends on the competition purpose, venue, number of teams (people) and other conditions.
One, a single round robin is called a single round robin. This method can make the participating teams or athletes have the opportunity to participate in the competition, and can determine the names of the teams or athletes more accurately. However, the number of single round robin is large, the competition time is long, and more venues and equipment are needed, so the number of teams or people participating in single round robin should not be too large, otherwise group round robin should be adopted.
(1) Calculation method of single round robin ranking: According to the international competition rules, 2 points will be scored for winning a game, 1 point will be scored for losing a game, and 0 point will be scored for the games that have not been played or have not been finished. The ranking of the group will be determined according to the number of games won. If two or more teams in a group have the same score, they should be ranked according to the results of their corresponding games. First, the game scores obtained between them will be calculated, and then the number of individual games will be calculated as needed.
(2) Although the group round robin can correctly arrange the ranking of teams (or people), it is difficult to use because of the large number of teams (or people), which brings difficulties to the organization and management of the competition. In this case, group round robin can be used. The most commonly used arrangement method of group round robin is "snake arrangement", that is, the sequence numbers are arranged according to the strength of each team (usually according to the ranking of the last game). The smaller the serial number, the stronger the strength, on the contrary, the weaker the strength. When grouping, the strength of each group is required to be average, that is, the serial numbers of each group are added. On the basis of "snake arrangement", some ball games divide seed teams and non-seed teams into groups by lottery, that is, No.65438 +0-4 team (seed team) is fixed in No.65438 +0-4 group or enters No.65438 +0-4 group by lottery; Then the numbers 5- 8, 9- 12, 13- 16 are drawn into the 1-4 group respectively. However, after the end of the grouping period, the second stage of the competition should be added and all the rankings should be discharged. There are two common methods: 1. For example, in the first stage, each group is divided into four groups for group round robin, and in the second stage, the first place in each group is a group for single round robin, and1-4 is decided; The second place in each group is a group, and the fifth to eighth places are decided; And so on. 2. In the first stage, the cross race is divided into two groups for round robin. In the second stage, the top two players in each group will compete to decide the number of places such as champion, runner-up and runner-up. In this way, the 5th-8th places are decided by 3 or 4 people in each group. 5 or 6 people in each group cross to decide No.9-12; According to this push.
Second, the teams (or people) participating in the single elimination tournament will compete in the arranged order. The winner will enter the next round of competition, and the loser will be eliminated until the champion is decided, which is called the single elimination tournament. The number of single elimination matches is relatively small, which is conducive to arranging more players to participate in the competition in a short time. However, this method is unreasonable, incomplete and opportunistic, and some measures must be taken to overcome these defects in order to play its role in practical application.
(1) The number of digits selected should be a power of 2. The commonly used numbers and positions in the competition are 8, 16, 32, 64, 128, 256.
(2) detour If the number of participants is not equal to the number of times, but less than the number of times, that is, when the number of participants in the first round is less than the number of times, no athlete's ranking is called "bye" ranking.
(3) When the number of participants is slightly greater than the power of 2, the square of 2 with the closest number of participants is selected as the number of numbers, and a few participants "grab the number". Grab the number is to play a game at the same number position first, and the winner enters the number. The position of grabbing the number is the same as that of bye-bye, and "grabbing the number" is also a round.
(four) seeds (that is, strong players or excellent players)
1, setting the role of "seed" The method of setting "seed" players is to overcome the irrationality of single elimination. When drawing lots, the "seeds" are evenly distributed in each "area" so as to meet at last, and strive to ensure the rationality of determining the ranking of the competition.
2. The number of seeds The number of "seeds" is mainly determined according to the number of teams or participants. Generally, a seed is set for1/6- 12 of the number of participants, that is, 6-12 players on average; At the same time, the number of "seeds" should be a power of 2, such as 2, 4, 8, 16, etc.
3. The position of "seeds" should be arranged as follows: the first seed is arranged at the top of the upper half; The second seed should be arranged at the bottom of the lower half; The third and fourth seeds should be inserted at the bottom of the upper half and the top of the lower half respectively; The fifth to eighth seeds should enter the bottom of odd quarters and the top of even quarters respectively; If there are many seeds (9- 16), and so on (the seed position number can be found in the seed position table). In fact, the "seeds" of the knockout stage are evenly distributed in various "zones".