How to put the transparent compass on the satellite map

You can do the following (for reference):

1. Intercept the map area to be measured from the satellite map (save it as a picture).

2. Open the compass software with a transparent back, and import the picture in step 1 into the compass.

The following is an example for your reference. In this example, you need to install a software called Yi Li Zhi Shi on your mobile phone. The brief steps are as follows:

First, open the software on your mobile phone, and open the geomantic compass function inside the software, as shown in the following figure:

Second, click "Survey Satellite Map" in the above figure, as shown in the following figure: < p And select the captured image from the satellite map (ensure that the captured satellite image has been saved to the mobile phone), and click "OK" to open the satellite map, as shown below:

Here:

You can move the center point of the compass to the required position through the "red dot" at the midpoint of the compass;

By moving to the larger "red dot" in the figure, the whole compass can be translated (the measuring line is also translated);

by moving to a "red arrow" in the figure (which one is on the right in the figure), the measuring line can be adjusted to different directions.

so you can test the satellite map (hint: in the satellite map, the north is directly above).