How to correct the jingle of reversing direction, and how to correct the wide side and narrow side of reversing storage?

The most important thing for reversing into the warehouse is to learn the right direction. For example, when you put it upside down, one side is wide and the other side is narrow. How to correct it? Are there any jingles or formulas that can help us remember how to reverse and correct our direction?

In fact, the direction of reverse correction can be summarized as several formulas:

1, come in on the left and turn the steering wheel to the left in advance. If the left side is narrow, delay turning the steering wheel to the left;

2. Come in from the right and delay turning the steering wheel to the right; If the left side is narrow, turn the steering wheel to the right side in advance.

Let's take a look at the detailed reversing direction correction method.

Why should we correct the direction? In fact, we all know that if the direction is not corrected in time, the wheels will have the risk of pressing the line in the process of continuing to reverse. Before correcting the direction, we should keep in mind a principle: wherever we hit the direction, we will swing the rear of the car.

First of all, we should judge which side the tail is biased to, then judge which side the tail belt should turn to, and finally turn to the corresponding direction. The body is about to return to the positive direction and continue the next operation.

If one side is wide and the other side is narrow, as shown in the figure, the rearview mirror is "left wide and right narrow". At this time, turn the steering wheel to the left 1/4 turn, and the car body can return to the positive direction.

As shown in the figure, the rearview mirror has a positional relationship of "right width and left width". At this time, turn the steering wheel to the right 1/4 turn, and the car body can return to the positive direction.

Another situation is that the car body is parallel to the garage, but the whole vehicle is left or right. If it is not adjusted, it is easy to press into the front corner of the garage when entering and leaving the warehouse. As shown in the figure, if the whole car body leans to the left, you can turn 1/4 to the right first, and it should not be easy to press the line when observing the front wheel. When the distance on the right side is almost the same, turn left 1/4, and return to the positive direction when the car body is parallel to the garage again; If the whole body leans to the right, the operation method is the same, but in the opposite direction.