How to make tiles have beautiful joints

Before you start sewing, you should clean the cracks in the tiles. You can use some small tools such as awls and brushes to clean up the dust with rags. It would be best if there was a vacuum cleaner!

02

Stick masking paper on the edge of ceramic tile, and make beautiful joints by yourself. Masking paper must be pasted.

Try to stick the edge of the paper to the edge of the tile!

It should be noted that the paper cannot exceed the edge position of the tile!

03

After pasting the paper, it's time to start caulking! Rubber hoses and guns are ready. Attention should be paid when caulking, one at a time, and the overall strength should be consistent, so as to avoid extruding a lot at once and a little at once!

04

After filling one, before the sealant has solidified, scrape the green steel flat with a scraper and fill some uneven filling positions at the same time!

05

Tear off the concealer paper immediately after the concealer is scraped flat and before it is completely cured!

If it is completely cured, it will be easy to take out the cured sewing agent when tearing the textured paper!

06

If the masking paper is not torn off in some places, you can scrape it off slowly with wallpaper knife or clean it with other cleaning tools! But be careful not to touch the adhesive that has not solidified!

07

When the horizontal bar is processed by the above method on the ground, then the vertical bar is also processed by the above method! Avoid cross-twisting, it's easy to spend!

08

The beauty sticker in the tool must be used! No matter what kind of tiles you have at home, use them!

Doing it yourself is unprofessional. If you don't use textured paper, the effect you fill out may be uneven and uneven!

Other tools, such as scrapers, can be replaced by flat plates if they are not available!