What's with the Jillijob engine jitter?
What's with the Jillijob engine jitter?
The normal operation of Geely Job engine depends on lubrication and heat dissipation, and the trembling of automobile engine is probably caused by lack of oil or deterioration of oil. The causes of engine jitter are as follows:
1. The most common cause of serious engine carbon deposition leading to vehicle jitter is that the throttle valve is too dirty or the fuel injector has too much carbon deposition. When there is too much carbon deposit in the engine, the gasoline sprayed by the fuel injection head will be absorbed by a large amount of carbon deposit during cold start, which makes the cold start mixture too thin and difficult to start. In this case, it is easy to start the car only if the gasoline with carbon deposits is saturated. After the car starts, the gasoline adsorbed on the carbon deposit will be sucked into the cylinder by the vacuum suction of the engine for combustion, which will make the mixture thicker and the combustible mixture of the engine thinner and thicker, leading to cold start.
2. There is something wrong with the ignition system. Check the working conditions of spark plugs, high-voltage lines and ignition coils. If the ignition system is not working properly, the spark plug may also cause such faults.
3. The oil pressure is unstable. If the engine carbon deposit has been cleaned, the throttle valve has been cleaned, and the oil pad and spark plug have been replaced. You will still find your body shaking at idle speed. I suggest you go to the 4S shop to check whether the oil supply pressure and intake pressure sensors are normal. If the oil supply pressure of the oil pump is abnormal, or the value of the intake pressure sensor is wrong and the work is not good, the body will shake.
4. The aging of engine parts and automobile jitter are also related to the aging of engine feet. The engine foot is actually the damping system of the engine. The engine feet are responsible for absorbing slight vibration when the engine is running. If there is something wrong with the engine base, these vibrations will be transmitted to the steering wheel and cab, causing idle vibration.
Why the Geely Job engine?
Geely uses 1.8TD engine and 2.0L self-priming engine.
In terms of power, Geely Job offers a variety of power options, including 1.8TD engine, 2.0L self-priming engine, 6-speed manual transmission and DSI6-speed automatic transmission in Australia.
Job's 1.8TD engine is a high-power version upgraded from the top ten engines of China Center introduced by Borui in 20 15, with maximum power 135kw/5500rpm, maximum torque of 285n m/1500-4000rpm and power.
The upgraded second-generation 1.8TD engine is superior to the current first-generation 1.8TD engine in economy, power and noise control NVH.
Extended data:
Job is a talking SUV. It is equipped with G-Netlink Geely intelligent vehicle system, 8-inch high-definition capacitive touch screen, "Hello Job" intelligent voice interaction, and supports functions such as iOS and Android intelligent interconnection.
Among them, Hello Bo Yue intelligent voice interaction allows consumers to enter the era of man-machine dialogue from the touch era, which changes the driver's click operation, replaces all behaviors except driving with voice control, and realizes voice control operation of telephone, multimedia, navigation and other functions.
Free your hands, let the driver focus on the road conditions and drive safer. It is worth mentioning that Geely Job is also the first China brand SUV in China to announce its support for Apple's car system.
Reference source; Baidu Encyclopedia-Geely Job What's wrong with Geely Job engine jitter? Why is Geely Job engine @20 19?