The weather is getting colder. Do you want to clean the floor heating? Smart old drivers will choose to do this.
In fact, cleaning the circulation system is very important. After all, many people know that there will be a lot of scale in the pipes when these things are used for a long time, so if there is too much scale, it will cause a problem that the thermal conductivity of the heater will become worse, so it is still very important.
Is floor heating cleaning useful?
It must be useful. After a heating period, clay and scale with a thickness of 1- 1.5 mm will be deposited in the floor heating pipeline, and the indoor temperature will be reduced by 3-6 degrees accordingly, especially in areas with poor water quality. If the pipeline is not cleaned effectively for a long time, on the one hand, the water flow will decrease, the flow rate will slow down and the indoor temperature will drop obviously.
On the other hand, what is more serious is that some will cause pipeline embolism, which can not be dredged, resulting in permanent failure and irreversibility of floor heating pipelines. Therefore, the floor heating pipes generally need to be cleaned once every 1-2 years to ensure the normal operation of the floor heating system.
Introduction of floor heating cleaning method
1. projectile cleaning is also a method of floor heating cleaning. Projectile cleaning mainly uses the impulse of gas. The operator disengages the floor heating pipe from the water separator, then puts the cleaning bomb into the floor heating pipe, and then sprays the cleaning bomb into the floor heating pipe with an air gun and comes out from the other end of the pipe, thus achieving a good cleaning effect.
2. At present, one of the most commonly used cleaning methods is pulse cleaning, which mainly uses water and gas to impact the inner wall of the floor heating pipe through some vibration waves generated by gas-water mixing, so as to achieve the cleaning effect. This method is simple to operate and has a good cleaning effect, and will not bring adverse effects to the surrounding environment.
3. The simplest and most effective way to clean the floor heating is chemical cleaning, that is, using some specific chemicals to clean the floor heating, but most of the chemicals used will cause certain corrosion to some parts of the floor heating, so if you want to find a professional to clean the floor heating, it is recommended not to use this method.
4. Many people and some plumbers wash the floor heating pipes with tap water, which is the most unreasonable cleaning method of floor heating and will waste a lot of water resources. In addition, because the water pressure of tap water itself does not exceed 2 pressures, it is not as high as the pressure in the heating pipeline, so it cannot impact and oscillate the rust and deposits on the inner wall of the pipeline.
How often should the floor heating be cleaned?
Floor heating pipes can be cleaned once every two or three years. If the water quality is poor or conditional, it can be washed once a year. In the circulation process of the floor heating pipe, because it is warm water, a large amount of biological slime will be produced, mixed with a part of metal corrosion, and residue will be formed on the pipe wall and attached to it. After a long time, it will accumulate thicker and bend more seriously, which will seriously block the filter screen, thus affecting the passage and heat dissipation of water.
After general floor heating cleaning, the indoor temperature will increase by at least 3℃. Moreover, cleaning the floor heating regularly is an effective protection for the floor heating pipeline and prolongs its service life.
Everyone must know whether the floor heating should be cleaned after reading it. In fact, as a new heating method, floor heating is very common at present. Under normal circumstances, floor heating must not be ignored after a period of use. Everyone must know how to clean and maintain floor heating. Originally, with the increase of the service life of the floor heating, it may be corroded by the accumulated water in the heating pipeline for many years, resulting in the floor heating being not hot, so the cleaning of the floor heating is very important.