Making special paper with Luban paper

First of all, we need to find a piece of solid wood, which needs to be thicker. If it is not so thick, we must put the boards together. The minimum requirements are 60 mm thickness and net size. As shown in the figure. The evaluation is divided into three layers. The carpenter suggested that it be made of hard materials. For example, old elms, oaks and ash trees, avoid using cork, such as pine and poplar.

Draw a line and start working. You need to prepare hand saws, chisels, hammers, sandpaper and so on.

Continue to tenon at the back

Now the hand saw comes in handy, showing the strength and skill of the hand.

Slotting: Use hacksaw and knife. Cut a hole in the weak part of the top corner and insert the saw blade.

Now the Luban stool, that is, the first process of production, has come to an end and is basically completed. Draw a line on this basis and carry out the following procedures.

On the damaged side, mark again and start to chisel mortises on both sides.

Began to cut the seam on both sides and broke an iron saw blade. Continue sawing according to the position shown in the figure, and both sides will be sawed at the same position until they are sawed to a certain extent, so that the slit is very regular.