What is the stress on the lintel? What is the emphasis on the installation of lintels?
What's so particular about doorstones?
1. The smoothness of lintel needs chamfering. Chamfering is grinding a bevel edge. It is very important to choose stones for the lintel. Although there was a method of selecting wood in ancient times, it is not recommended to use wood as a beam because the corrosion resistance of lintels is not high. Many stone decoration masters suggest using granite as the material of doorstones. Compared with commonly used marble, granite has higher hardness, can withstand trampling, and then is not easy to wear.
2. To choose the color of the lintel, we must first understand the function of the lintel. One is to divide the area, and the other is to leave expansion joints for the floor. So most lintels are made of stone, which has some color difference with the floor, such as black or dark brown.
3. If the width of the stone can't be limited to a whole block, try to divide it into three pieces, that is, divide it into two halves first, and then divide the remaining half into two halves. When paving, two small pieces are on both sides and half large pieces are in the middle.
4. If the width of the stone can't be limited to a whole block, try to divide it into three pieces, that is, divide it into two halves first, and then divide the remaining half into two halves. When paving, two small pieces are on both sides and half large pieces are in the middle.
5. The dining room is suitable for installing blue doorstones belonging to water, which can make residents feel relaxed and happy. But also can enhance the visual space, so that people can eat happily and be healthy.
6. The living room is suitable for installing a yellow doorstone belonging to the soil, which can make the residents think clearly and feel peaceful and stable. For those who want to practice or rest, Huangmenshi is a very stable and quiet material, which is also helpful to health.
What is the emphasis on the installation of the threshold?
1. During installation, the doorsill is usually paved with cement mortar. After a certain period of trampling, sometimes cracks will appear in the surrounding cement mortar. Therefore, it is suggested that when laying with cement mortar, leave a gap on the ground side of the bathroom, which is roughly controlled at about 5 mm wide. After filling with cement mortar, the surface is slightly concave, and then make a circle with building glue or silicone glue (the material for fixing sanitary ware).
2. Even if the cement mortar cracks and leaves the lintel, when there is water, it will not seep out from the cracks. At the same time, you can also use building glue or silicone glue to punch holes in the joint between the wooden door cover and the lower part of the bathroom floor tile, so as to reduce the chance of discoloration and rot of the lower part of the door cover caused by water extending and infiltrating along the ground.
This is what I brought to you about lintels and related reference contents about lintel installation. I believe that after reading these introductions, you should have a general understanding of the importance of lintel and the importance of lintel installation. I hope it will help you to some extent.