Where is the sagitar heating box?
Sagitar water tank is located between the engine and the front bumper. Automobile water tank generally refers to automobile radiator and belongs to automobile cooling system. The radiator in the engine water cooling system consists of three parts: water inlet chamber, water outlet chamber, main board and radiator core. The steps of adding water to the automobile water tank are as follows:
1. Turn the pressure cap counterclockwise. If you hear a hissing sound, please wait until the sound disappears before turning it on.
2. Inject a proper amount of coolant into the coolant expansion tank to reach the position between the maximum scale and the minimum scale of the expansion tank;
3. Open the coolant expansion box cover and start the engine;
4. After starting the engine, the coolant in the fuel tank will gradually decrease. At this time, add an appropriate amount of coolant to the expansion tank until the liquid level reaches the position between the maximum and minimum degrees of the coolant expansion tank;
5. Reinstall the cover and ensure that the pressure cover is tightened by hand and fully seated.
First of all, we must know the cause of the water tank blockage, and first find out the location of the blockage. As long as it's not blocked in the water tank, it's easy to do, just dredge the pipeline. Find a repairman and ask him to remove the inlet and outlet pipes of the heater tank, and then wash them back and forth with the water gun of the car wash until the water flowing out becomes clear.