Land Rover disconnector voltage is too high.

The Land Rover disconnector voltage is too high to replace the throttle, as shown below:

1. Remove the accelerator cable, screw the accelerator control mechanism to the maximum position, hold it with the left hand and the accelerator cable with the right hand, and take it out from the gap of the control mechanism.

2. Remove the cable from the accelerator cable bracket, remove the limit clamp and gasket, and store them in a safe place. Remove the accelerator cable bracket fixed to the throttle body.

3. Loosen the three fastening bolts on the throttle body with an Allen wrench, and then remove the throttle body.