What happened to the Tiida sensor?

There are many reasons for the failure of Trent sensor, and different sensors have different reasons for damage. The causes of Trent sensor failure are also different. The installation position and function of each sensor are different, and the causes of its damage are also different. Vehicle sensor is the input device of automobile computer system. It can convert all kinds of working condition information of automobile, such as vehicle speed, temperature of various media, engine working condition and so on. And convert them into electrical signals and transmit them to the computer, so that the engine is in the best working state. The sensor is broken, as shown below: 1. Symptoms of bad speed sensor: the engine is unstable when idling, the vehicle suddenly stops or turns off when slowing down, the acceleration performance of the engine decreases, the speed display on the instrument is biased, and the engine fault light is on. 2. It shows that the throttle position sensor is broken: if the throttle position sensor is out of balance, the correct ignition advance angle and air-fuel ratio of the mixture cannot be guaranteed. The throttle position sensor should be accurately adjusted to the specified voltage reading. If the adjustment is too low, the exhaust gas recirculation system will not provide enough exhaust gas in time, and knocking will occur when accelerating. If the adjustment is too high, the exhaust gas recirculation system will react too fast and provide too much exhaust gas, thus reducing the power. 3. Damage of coolant temperature sensor: If the coolant temperature sensor fails, the engine will have unstable idle speed, fire, flameout or increased fuel consumption. According to the manufacturer's regulations, the resistance value of the coolant sensor should be tested with a multimeter at different working temperatures. Therefore, there may be many reasons for the failure of Trent sensors, and different sensors often have different damage reasons.