How to use the Luya spinning wheel?
When the hook in the fish escapes at high speed, it must not be tightened instantly to release its strength. Instead, you should press the wheel cup with your fingers and apply a little pressure to relieve the impulse of the fish. The hand brake wheel exerts pressure on the wheel cup through the brake lever, which is characterized by instantaneous stop and instantaneous release of force. It is suitable for catching target fish with many underwater obstacles and the habit of digging holes. Mostly used for rock fishing.
Because of its small tolerance, it is not suitable for beginners. It is also not suitable for fishing in other fresh water bodies. Most of the high-end spinning wheels are designed for Luya Sports, and the close parallel winding technology is applied. So that the winding can be well installed in the bobbin under the condition of no load. The problems of disorderly wiring and loose flat cable are greatly avoided.
Low-resistance shallow cups are mostly developed and designed for PE lines, which are easy to throw. If it is a conventional reservoir for fishing, it is a huge waste to buy high-grade wheels, and it is impossible to make the best use of them. On such occasions, the Wolf King of 150 yuan is not much different from STELLA of 3000 yuan. When using the spinning wheel, special attention should be paid to avoid scratching and wearing the edge of the front silk cup. Don't put it on the concrete floor at will. Once this position is rough, it will greatly affect the fluency of throwing.
Extended data:
Spinning wheels are widely used in marine fishing and Lu Ya activities, as well as fishing in lakes and ponds. It is characterized by simple operation and can be completed completely by hand feeling without eyes. Throwing resistance is small, so you can cast a lighter fishing group. It's not easy to mess up the thread. The early spinning wheel was multi-point, with a little gap in reverse rotation. Later eliminated.
At present, the spinning wheels on the market are all products with reverse rotation and no gaps. The early spinning wheel cups were mostly engineering plastics, but now they are generally aluminum alloy or aviation aluminum alloy wheel cups. At the end of 1990s, a powerful spinning wheel appeared. The locking force of spinning wheel is greatly improved by using cold forging big gear and strong biting column.
The low transmission design ratio makes it possible to drag the giant away from the deep sea. In order to cooperate with the powerful operation, an integrated powerful crank is adopted. This kind of spinning wheel is suitable for fishing big foreign fish with strong pulling force. For example, the locking force of high-end spinning wheels of dozens of kilograms, such as GT, Red Dry and Thin Tooth, has reached 35 kilograms, and some manufacturers' spinning wheels have cancelled the reversing function. There is no reversing lever.
According to its functions and uses, spinning wheels can be roughly divided into automatic release wheels, hand brake wheels and automatic hand brake dual-function wheels. The automatic release wheel is divided into front type and rear type, and the latter type has been eliminated because of its complex structure and easy damage. At present, mainstream manufacturers in the market mostly produce pre-release spinning wheels. The automatic pressure relief wheel exerts pressure on the wool brake pad through the adjusting screw valve at the top of the wheel, resulting in braking resistance. Tightness depends on personal habits and actual situation.