Explain how to adjust the fishing float.

Fishing is a hobby of many people. Some people say that fishing is addictive. It's true. Even I just learned to fish, and I'm a little addicted. Today, I brought you a schematic diagram of how to make fish float. How to adjust the fishing drift How to adjust the fishing drift Complete five-step drift adjustment method schematic diagram

Fishing skills, drift adjustment method, complete five-step drift adjustment method schematic diagram

Step one, find the bottom with heavy lead.

The main purpose is to measure the water depth, that is, to roughly grasp the distance from the bottom to the float, which belongs to rough bottom finding.

In the second step, the float moves down (about 5 cm longer than the sub-line).

The main purpose of this step is to measure the distance of the hook, because heavy lead was used in the previous step, and the float must be completely submerged in the water at this time.

The third step is to cut the lead skin floating and adjust it to the required grid.

Due to the operation in the previous step, the float completely sank into the water, and it is known that the distance between the hook and the float is less than the water depth. At this point, when the float surfaced by cutting the lead skin, the double hook must be off the bottom.

The fourth step is to hang bait to find the bottom.

This step is very important, because the operation in the third step makes the sum of the weight of the vertical drop and the double hook exactly equal to the remaining buoyancy of the float. At this time, if the bait is hung on the hook, the float will inevitably drop or sink into the water again, that is, the buoyancy of the float can be judged by the weight of the double bait, and it is decided whether to catch the spirit or to catch the dull fish.

Step 5, adjust the float to the required grid.

Going back to the above operation, taking the empty hook floating four eyes off the bottom and two eyes left after adding bait as an example, it shows that the weight of bait is two eyes. Then you need to gradually adjust the height of the float until more than two eyes are exposed after the fish floats into the water, which shows that the hook has reached the end. Then, turn it back until the float shows two eyes. At this time, the state of the bottom double hook is that one hook lies flat and the other hook touches the bottom. This drift adjustment method belongs to the typical drift adjustment method of platform fishing. In general, you can follow the above operation. When the fish mouth is chaotic and the influence of small miscellaneous fish is great, the float can be pushed upward so that the part of the float exposed to the water is higher than the eyes until the whole eye, which can effectively filter the signals of some small fish drifting. If the fish mouth is light or the fish floats, you can push the float down to make it lower than your eyes or fish directly from the bottom to increase the frequency of catching fish.

Eight points for attention in fishing >>

Guide to selection of fishing tools >>