What track should curtains use and how to install them?

Hello, you can use single track, double track or triple track. The installation principle is the same. The following is the installation method for your reference:

First, positioning

The accuracy of line drawing positioning is related to the success or failure of curtain installation. First, measure the distance between the fixing holes and the size of the required installation track.

Secondly, install curtain rails.

1. When the width of the window is larger than 1200mm, the curtain rail should be disconnected, and the bending at the disconnection point should be staggered, and the bending should be gentle, and the lap length should not be less than 200mm. Ming curtain boxes are usually equipped with rails first. Machine screws should be added to the heavy curtain track; The concealed curtain box should be installed behind the track. The small angle of the heavy curtain track should be closely arranged, and the specification of wood screws should be not less than 30 mm

2. Install the elevator, rotate the elevator 90 degrees to connect with the track, and install the elevator on the top plate with self-tapping screws. If it is a concrete structure, it is necessary to add expansion screws.

Third, install curtain rods.

1. Correct the connecting fixture, install the rod or wire and pull it on the fixture. Do level off, consistent with the room elevation.

2. Standard curtain track (double track) should be installed, and its foundation width should generally be above 15CM, and monorail can be reduced as appropriate.

Fourth, adjust the position.

Floor-standing curtains or curtains hanging on the table should be installed with the same width as the window sill to avoid unsightly curtains hanging down.