What is the cast-in-place balcony method? What if the balcony leaks?

Balcony is a special existence. Under normal circumstances, the bearing capacity of the balcony is not higher than that of other places, and it is not particularly valued in decoration. But many owners will also take care of the balcony. In fact, many factors need to be considered in decorating the balcony, such as the safety of the balcony. Many people don't care. What is the cast-in-place balcony method? What should I do if there is water leakage? Next, follow us to learn about the relevant content!

First, the balcony cast-in-place method

1, the comprehensive base price of balcony and awning with precast hollow slab on cast-in-place cantilever beam cannot be applied, and the corresponding comprehensive base price should be calculated separately according to cantilever beam and hollow slab.

2. Brush the liquid asphalt, cover it with a torch linoleum, and make them stick together. If the technology is good, you can make a drainage slope, so that rainwater can be quickly discharged along the drainage slope or dripping eaves, and the influence of rainwater on the roof can be reduced.

3. The comprehensive base price of the beamless canopy supported by the stigma shall be implemented. Pick out the cast-in-place beam-slab balcony with the wall length exceeding 1.5m, and implement the comprehensive base price of beam and slab. Cast-in-place beam-slab balcony with column support, no matter how long it is chosen, the comprehensive base price of beam-slab is implemented.

4. During the construction, the construction unit shall conduct quality self-inspection, self-inspection and self-correction according to the construction process and level, and make construction records. The supervision unit should do a good job in the acceptance of each working procedure, and the next working procedure and the next working procedure can be carried out only after passing the acceptance.

Second, the balcony cast-in-place leakage?

1. The waterproof layer was damaged by the construction of the house upstairs. This reason is very common, and it is also the real reason why many people's roofs leak. There is nothing to say about this situation. It's purely because of the building above. The solution is to discuss with them and fix the waterproof layer, so that the problem of roof leakage can be solved.

2, if the roof is waterproof, local leakage, should carefully check whether there is local damage to the waterproof layer, waterproof layer lap whether there is a gap, find the leakage point. Then use the same waterproof material to repair, and the new and old materials at the lap joint are seamlessly bonded with hot melt adhesive or adhesive.

Some families set up vegetable gardens or flower stands on the top floor and planted many things. However, when these were designed, there was no fireproof isolation layer, so water soaked the floor, causing water leakage in the following layers. Some friends even set up a small pool on the roof to raise fish or lotus flowers. If this is not waterproof, the erosion of the lower layer will be very serious.

The above is Bian Xiao's detailed answer. I wonder if you are satisfied with our introduction.