How to add Xuanyi antifreeze?

1. Inspection: Before completely replacing antifreeze, it is necessary to conduct a comprehensive inspection to see if there are traces of leakage and cracks in each pipeline. The key point is to check the five-way water pipe, which is named because it has five interfaces to connect all parts. After flowing through the five-way water pipe, the antifreeze is distributed to different parts of the car to play a role. If there is antifreeze leakage in this part, replace the water pipe or re-fix the interface according to the situation.

2. Drainage: Drain the old antifreeze, and then clean the liquid channel with clean water. Add clear water to the antifreeze replenishment tank, then inject clear water into the tank to make the clear water continuously flow through the engine cooling system, and then idle for 3 to 5 minutes to circulate water. The water in the pitcher is a little pink at first. Continue to inject clean water until the water becomes clean. Be careful not to forget to remove the heating water pipe and clean the water in the heating water tank.

3. Replace new liquid: After draining about 1 hour, add new antifreeze from the water pipe of the water tank (radiator), which is the way to make the antifreeze flow into the water tank quickly. Then, add another bucket of antifreeze into the antifreeze tank until the antifreeze tank is almost full, and keep running for about 10 minute. At this time, the liquid level of the cooling system drops due to the exclusion of some air, and then antifreeze is added, preferably to the highest mark "MAXT" of the storage tank.