China Naming Network - Weather knowledge - Introduction of door opening modeling types

Introduction of door opening modeling types

Many friends want to make our home look spacious and have a certain space division, so many parents choose to decorate the doorway. What are the types of doorway shapes of Edin Dzeko? Let me introduce this problem to you. Let's take a look at the types of doorway shapes and the decoration skills of doorways.

Introduction of door opening modeling types

1, Chinese doorways: Chinese doorways are mainly made of wood, paying attention to the feel of materials, and using high-grade hardwood. Chinese doorways are round and elegant, mostly round or symmetrical octagonal. Doorways have been carefully carved by craftsmen, and every Chinese doorways can make people miss the past and have a good yearning for the future. Chinese doorways pay attention to symmetrical and balanced layout, which is correct and steady.

2. Arched doorway: As the name implies, arched doorway is arched doorway. When decorating a house or transforming the space of a house, especially when choosing a room with Mediterranean decoration style, people often choose arched doorways or change the original square doorways into arched doorways.

3. European style Arch doorway is an arch-shaped empty doorway in indoor space, which plays a role in dividing the visual effect of space. In fact, it is a kind of expression in European decorative style. In fact, this design technique can be seen in many European oil paintings or European buildings, but it has not been applied to our daily life.

Second, the entry decoration skills

1. For the measurement of the doorway, the following doorway is the size of the decorated doorway without modification. For doorways that are still under renovation, it is suggested to make a doorway with a height of 2050mm and a width of 860 mm. Make doorways according to this size, and the display effect of finished doors is the best. It conforms to ergonomics and aesthetics. Actually measure the width and height of the doorway. It is necessary to measure whether the top, middle and bottom of the doorway are consistent. If not, the narrowest part shall prevail, but the error shall not exceed 20_.

2, for the error of more than 20mm to modify the hole in the wall, the correction can be modified with cement mortar or lime. The wall thickness of the doorway should also be measured at the top, middle and bottom to see whether the wall thickness is the same, and also to see whether the wall thickness at the top of the left and right walls and the doorway is the same, and the maximum value is different, but the error shall not exceed 5_.

3. When there is a protruding beam above the door, the door cover line cannot be installed. It is also necessary to make a fake wall 50-60mm high, the length is the same as the width of the doorway, and the depth is the same as the thickness of the doorway. There are steps at the door. The step height should be added to the sleeve line with step edge, and the specific size depends on the step height. Pay special attention to the thickness of wall tiles at the entrance of bathroom and kitchen.

4. Generally, single-sided tiles are thickened by 25_, and double-sided tiles are thickened by 50_. The details are signed by the designer, the customer and the decoration company. The final dimensions shall include the thickness of the wall tiles. You'd better measure the wall tiles after they are pasted. Pay attention to the opening direction of the door when measuring. The opening direction is defined as: from the front of the door, the left side is hinged to the left, and the right side is hinged to the right. The measurement of hole and window cover is basically the same as that of door opening, but the dimensions are recorded according to the measured results without deduction.

Bian Xiao introduced the types of door modeling and the decorative skills of the door here. I hope that through the introduction of Bian Xiao above, friends can have a certain understanding of the related content of doorway modeling.