What should I do if the KIA k3 headlight height adjustment switch is broken?
The fault of headlight up-and-down adjustment may be the fault of headlight internal adjustment motor, and most of them advocate going to 4S shop for maintenance. Car headlights, also known as car headlights and LED daytime running lights, as the eyes of cars, is not only related to the external image of friends, but also closely related to driving at night or driving safely in bad weather. The use and maintenance of car lights can not be ignored.
Maintenance methods of headlight height adjustment damage are as follows:
1, the headlight regulator is broken and can be repaired, but the master of 4S shop will suggest replacing the assembly. It is very simple to directly repair and replace parts;
2. Under the influence of trunk load, long-term vibration and high and low road conditions, the irradiation direction of car headlights will deviate from the standard direction. The function of the dimmer is to adjust the irradiation direction of the headlight from the deviation direction to the standard direction, thus improving the lighting effect of the headlight;
3. At present, there are two main ways to adjust the light: the manual way is mainly composed of headlight adjusting motor and manual switch, the headlight adjusting motor is at the headlight, the control part is in the cab, and there is a manual switch on the dashboard, which can be adjusted according to the driver's needs;
4. The automatic type consists of headlamp adjusting motor, controller and two level sensors. Horizontal sensors are installed at the front and rear ends of the car body respectively, which mainly detect the height from the car chassis to the ground and transmit the height difference to the controller in the form of electrical signals. After comparison and calculation, the controller controls the headlight adjustment motor, thus completing the automatic adjustment function of the headlight.
(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)