KIA k4 tire pressure lamp returns to zero. How to exclude KIA k4 tire pressure lamp?

When the tire pressure of KIA K4 is lower than 1.8, the tire pressure monitoring light will light up, so check whether the tire pressure detector is normal. When the car breaks down, if the tire pressure monitor fails to give an alarm in time, it means that there is something wrong with the tire pressure monitor; If the ignition switch is in the ON/START position, the indicator lamp and TPMS indicator lamp will light up for 2 seconds and then go out. In this case, either the original receiver of the vehicle has no learning constraint, or the receiver controller is replaced and the receiver controller has no learning constraint. You can go to the 4S store and ask professionals to use hand-held learning tools to re-acquire all tire sensor IDs and bind the receiving controller. KIA K4 tire pressure light reset method: First, make sure the key is turned on in the second gear, and let the instrument display the kilometer interface through the menu key on the left side of the steering wheel. At this time, press the up key on the left side of the steering wheel, and the dashboard will display (low-voltage driving indicator re-enabled: RRFI actively re-enabled: r). At this time, press the (R) key on the dashboard (some black keys does not display R), and the dashboard will display (Is the tire pressure normal? There are two options "+Yes" and "-Cancel" the tire press. Yes+Cancel-), press the+key on the right side of the steering wheel, wait for 10S, then turn off the key, start the vehicle again, and find that the tire pressure alarm disappears.