Mini World Antique Architecture Course

The mini-world ancient architecture course is as follows:

Operating equipment: Dell Yue Ling 7400.

Operating system: win 10

Operating steps: mini world v8.2 1

1. First, find a suitable location and enclose a 46X46 area with Shi Zhuan (or any square). Take water buildings as an example here, because strange things are easy to encounter on land and the terrain is irregular.

2. In the place originally surrounded by Shi Zhuan, raise a square outward and enclose it with grass squares.

3. Then, raise the red clay by 7 squares, so that the whole is an 8-square column.

4. Invert an oak staircase at the top of each stained clay. Notice that there are two colored clay on the side.

5. Next, we will deal with the middle area of four faces. The timely block is placed in the black area, the timely half brick is placed in the green area, and the timely stairs are placed upside down in the red area.

6. The two pillars in the middle area are Shi Zhuan half bricks downward, and the spacing between them is half a grid.

7. The next step is to start building the roof. First, put a circle of Shi Zhuan on the trap door one grid away from the time, and then put a circle of Shi Zhuan half brick on the periphery of Shi Zhuan.

8, and then in Shi Zhuan, in turn, increasing half a brick, total * * * accumulated 6 layers.

9. Connect each column with two-grid-high timely building blocks. Include a middle area. Install a trap door in the highest block. Be careful not to put the trap door on the red soil.

10, starting from Shi Zhuan, add half a brick in turn, and stop after accumulating to 12 layer.

1 1, capping the 12 floor, placing the "Kissing Beast" on the roof, using half brick, 3 square, 2 square and 1 square in turn, and placing four corners.

12. After the above operations, the palace in my world was built.