Where is KIA k3 coolant?

Water tank plus KIA K coolant of Pacific Auto Network. When the engine is cold, the liquid level should be between the F (full) and L (low) marks on the side of the auxiliary water tank. If the cooling water level is low, add enough distilled water (deionized water) (except in the Middle East) or add enough premixed cooling water (in the Middle East). Make the liquid level in the auxiliary cooling water tank reach the F (full) position, but do not overdo it.

Principles of purchasing antifreeze

(1) Select the freezing point of antifreeze according to the ambient temperature conditions. The freezing point of antifreeze is one of the most important indexes of antifreeze, and it is also an important condition for antifreeze to prevent freezing. In general, the freezing point of antifreeze should be around-10 c ~15 c under local environmental conditions. If the local minimum temperature is -30℃ and the freezing point of antifreeze should be below -45℃, you can choose No.3 antifreeze produced by Beijing Petrochemical Plant or FG-40 antifreeze produced by Qingdao Daily Chemical Plant. If ethylene glycol mother liquor is selected for preparation, an antifreeze with ethylene glycol concentration of 59%, freezing point of -50℃ and density of 1.0786mg/ cm3 can be prepared.

(2) Choose antifreeze according to different requirements of vehicles. Under normal circumstances, imported cars, domestic imported production cars and high-end cars should use permanent antifreeze (2~3 years), ordinary cars can use direct antifreeze, and softened water can be used in summer.

(3) Choose antifreeze according to the number and concentration of vehicles. Units and departments with a large number of vehicles and relatively concentrated vehicles can choose small packaging antifreeze mother liquor with stable performance. Because the package is compact, it is convenient for transportation and storage, and it can be flexibly modulated according to different environmental conditions and different work requirements, so as to achieve the purpose of saving and practicality. In the case of few or scattered vehicles, you can choose antifreeze with direct use right.

(4) Generally, antifreeze with anti-rust, anti-corrosion and descaling ability should be selected. The most important thing about antifreeze is rust prevention. So choose brand-name products. Preservatives, corrosion inhibitors, scale inhibitors and cleaning agents are added to these products, and the quality of the products is guaranteed.

(5) Select the antifreeze matched with the rubber sealing conduit. The antifreeze should have no side effects, such as swelling and corrosion of rubber sealing ducts.

How long should the antifreeze of Dongfeng Kia k3 be replaced? How to replace the antifreeze of KIA k3? Dongfeng Kia k3 original antifreeze should be replaced once a year as required. If other antifreeze is used, please refer to the product manual for its replacement cycle.

Replacement of antifreeze:

1. Before the antifreeze is completely replaced, it is necessary to make a comprehensive inspection to see if there are traces of leakage and cracks in each pipeline. The key point is to check the five-way water pipe, which is named after the five interfaces connecting all parts. After the antifreeze flows through the five-way pipe, it is distributed to different parts of the car to play a role. If there is antifreeze leakage in this part, replace the water pipe or re-fix the interface according to the situation.

2. Drain the old antifreeze, and then clean the liquid channel with clear water. Add clear water to the antifreeze replenishment tank, then inject clear water into the tank to make the clear water continuously flow through the engine cooling system, and then idle for 3 to 5 minutes to circulate water. The water in the pitcher is a little pink at first. Continue to inject clean water until the water becomes clean. Be careful not to forget to remove the heating water pipe and clean the water in the heating water tank.