How much does Chevrolet Cruze need to clean the throttle? How often does Cruze clean the throttle?

Chevrolet Cruze cleans the throttle around 200 yuan. Throttle is a controllable valve to control the air entering the engine. After the gas enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, which will be burned to do work. It connects the air filter and the engine block, and is called the throat of the automobile engine. How often to clean the throttle depends on the environment of the owner. If the vehicle is in a place with serious environmental pollution, it needs to be cleaned regularly. Problems needing attention in cleaning the throttle of Chevrolet Cruze: If there is too much sludge in the throttle, it may cause poor engine acceleration and increase fuel consumption, which is a big worry for the owner. So what if the throttle is dirty? Going to the 4S shop can be finished quickly, but don't you go to the 4S shop every time? Actually, you can do it yourself, just don't forget to initialize. First, circle the fixed metal bundle with a little oil to avoid the teeth slipping during disassembly. Remove the metal ring of the throttle hose. After the hose is removed, the left end is the position of the throttle. Take off the negative electrode of the battery, turn off the ignition switch, straighten the throttle, spray a small amount of "carburetor cleaner" into the throttle, and then carefully scrub it with polyester rag or high-spinning "non-woven fabric" and go deep into the throttle that you can't reach. Hold the rag and scrub it carefully. When cleaning the throttle valve, it is not necessary to disassemble it, but the sealed part of the inlet steam must be cleaned, and the idling motor must be disassembled before cleaning. Borrowing and cleaning syringes has advantages and disadvantages. It is generally recommended that the maintenance station should not disassemble and clean to prevent other unnecessary waste, such as the need to replace the sealing ring or install other gaskets after disassembly, or the phenomenon of oil leakage during disassembly and assembly, which will delay the owner's time.