What should I do if the warm air of Jinbei sea lion is not hot?

1, one is caused by the engine cooling system,

2. The control mechanism of warm air doesn't work well.

When maintaining, it is necessary to determine what causes it first, and then carry out corresponding maintenance. Judgment method: Look at the temperature of the two inlet pipes of the warm air small water tank. If both pipes are hot enough, there is something wrong with the air flow control mechanism. On the contrary, if both pipes are cold, or one is hot and the other is cold, it is a problem with the cooling system.

The warm air of the car is blown into the cab by the blower. If the air volume is insufficient or the distribution of cold and hot air is not good, the heat of the warm air tank will not be radiated, and the temperature of the warm air will not come up. At this point, first check whether the filter element is dirty or blocked, clean it, and replace it in time if necessary.

Extended data:

The specific operation steps of turning on the automobile heater are as follows:

First, step on the brake pedal of the car and prepare to start the engine.

Second, press the one-button start key of the car to start the engine.

Third, run the engine until the water temperature reaches 90 degrees Celsius.

Four, loosen the wind speed adjustment knob to the right and the highest gear.

5. Turn the temperature adjustment knob to the red area on the right to turn on the heater.