Magotan heater water tank disassembly tutorial

First, remove the workbench. There are nine screws on the workbench. Pay attention to where there are screws. There are screws on the lower side of the workbench. There are two screws just above the wheel arch;

2. Dismantle the instrument assembly, and pay attention to the instrument connecting wire when disassembling to avoid breaking;

3. After the instrument assembly is removed, the overall picture of the heater is leaked. The heater is connected by three screws. Remove the top one first, and then remove the other two screws.

Fourth, then remove the water pipe connecting the heating water tank.

5. Take out the heating water tank.

6. The following figure is the overall schematic diagram of the water tank. Don't worry when disassembling. Remove the connecting wire, connecting screw and connecting water pipe in turn, and take out the water tank. I hope I can help you.