What is the significance of the threshold stone?

1. Before paving the threshold stone, a water retaining sill must be made first. The height of the completed surface should be 30 mm lower than the stone ground, and the water retaining sill must be curved when it contacts the ground. Flange.

2. One of the functions of the sill stone is to retain water, so waterproof construction is necessary. The construction master must do flexible waterproofing on the inner corners of the water retaining sill and its surface.

3. The threshold stone must be wet-paved, not dry-paved, because only this material can prevent shower water from leaking out after it falls to the ground.

4. The door cover and door cover line are installed on the threshold stone. A 2-3 mm gap should be left at the root of the door cover and sealed with weather-resistant glue to prevent the door cover from getting moldy.

5. The length of the threshold stone should be 50 mm greater than the net width of the door frame, and then paved in the center. If there are areas that are not covered on both sides, they must be smoothed with wet slurry.

6. The threshold stone must be installed before installing the door frame, because the door frame has a certain thickness. If it is installed at the back, some areas will definitely not be laid in place.

Villa Master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance rendering services, thousands of popular drawings for you to choose from: www.bieshu .com?bdfc