Barite safety management plan and requirement analysis?

1. Requirements for entering the well: It is strictly prohibited to go down the well wearing chemical fiber clothing, and it is strictly prohibited to go down the well without wearing a mining lamp, mining hat, or protective mask; it is strictly prohibited to go down the well wearing slippers. It is strictly prohibited to bring fireworks into the well. It is strictly forbidden to go down the well with emotions.

; Violators: given a warning for the first time and a fine of 50 yuan for the second time. Expelled from the mining industry three times. Those who are late for training and study meetings, leave early, fail to take roll call, or fail to sign when entering and exiting the well will be fined 50 yuan per time. Those who go down the mine after drinking will be specially punished with a fine of 200 yuan for the first time and expulsion from the mine for the second time.

2. Excavation team:

Requirements of the drilling and blasting team: Team leader Jia Chaolong is responsible for the safety production work of this team; when entering the excavation working face, knocking and questioning must be carried out and loose parts must be cleaned. Live rock. Check whether everything is working safely; whether the mechanical equipment is in good condition. Are the feng shui pipelines normal? The construction shall be carried out strictly in accordance with the design requirements of the roadway (main shaft roadway: 2.6 meters wide and 2.5 meters high. Wind shaft roadway: 2.2 meters wide and 2.3 meters high). The design centerline is not followed. The concave and convex part of the roof of the wall shall not exceed 10 cm. If the acceptance criteria are not met, you will be responsible for handling it yourself. When drilling holes; self-draining before blasting. Strictly follow the "Regulations on Gunfire Operation Procedures" for one-time charging and one-time detonation. When it is necessary to fire the cannon twice, three times or multiple times; after each cannon fire, wait for the cannon smoke to blow away before entering the working surface; and you must knock on the top and top to check the safety situation. When blind guns or dumb guns occur, they shall be dealt with strictly in accordance with the "Requirements of Gunfire Operation Procedures". It is strictly prohibited to litter or lose detonators and explosives.

; Failure to set up a police perimeter for blasting; discovering that the explosives have been loaded and drilling operations again; mechanical drainage is still being performed during the charging; and the pumping lines have not been moved to a safe location. The team on duty will be fined 200 yuan. 100 yuan for team members. The underground feng shui pipes and drainage facilities tools are left indiscriminately. If any tools that are damaged without protection (such as air guns, flexible air ducts, water pumps, cables, etc.) are found, a warning will be given. Penalty for the second time. (If the damage is caused by setting off cannons or not taking care of the damage when asking for help), the team on duty will be punished with a compensation of 200 yuan according to the price. ; Blind guns and dumb guns are not dealt with according to the requirements. The team on duty will be fined 500 yuan. There is no knocking before and after blasting, and there is no gun mud for blasting operations. The team on duty will be fined 200 yuan. 50 yuan for team members. If a person is found to have hidden detonators and is transferred to the judicial authorities, his monthly salary will be deducted. Expelled from mining membership.

3. Slag removal team:

The slag removal team is responsible for loading the vehicle with a slag removal machine, transporting it with a tricycle, and manually cleaning up the residue. Li Yugui, the squad leader, is responsible for the safety production work of his team. When doing work, other safety tasks such as asking questions and asking questions before, during and after the shift must be strictly carried out. Check the operation of the slag scraper and tricycle and whether all components are complete and intact. (Such as: oil, brake system, hydraulic system, whether the steering gear can be used flexibly, whether the screws are loose, etc.). Due to the loud noise and poor speech signal during mechanical operation, it is necessary to understand each other before mechanical operation can be carried out. During the slag removal operation, stones that are too large must be crushed with two hammers before they can enter the slag removal machine belt. Prevent oversized stones from rolling down the belt of the slag scraper and injuring people and damaging machinery and equipment. A dedicated person is responsible for managing the cables of the slag scraper, and is responsible for hanging, lifting and placing them when moving forward or backward. Prevent it from being crushed by tricycles and slag scrapers, causing leakage and causing accidents. The driver of the slag scraper must be proficient in mechanical performance and operating skills. When transporting tricycles, the regulations of "vehicles and pedestrians and pedestrians must not drive" must be observed underground. When dumping slag on the ground, you must pay attention to check whether the parking place of the tricycle is flat to prevent the slag dumping container from tipping over or damage to the hydraulic pump. Safety issues such as slopes and loose soil. When loading slag, the slag scraper and tricycle must match the effective distance for reverse loading. Protect machinery from damage.

Slag scraper driver: Ye Jian; ; ; Ye Liudong

Tricycle driver: Wang Yulu; ; Xu Pinggang; ; Ye Liujie; ; Chen Yongqiang

Cables are crushed, air ducts are crushed, or pedestrians fail to stay in a safe place during transportation and cause accidents. The individual is fined 200 yuan. Those who fail to ask for support will be fined 200 yuan by the team on duty. (Members of the team will be punished with a penalty of 50 yuan, excluding tricycle and slag scraper drivers). Drivers of slag scrapers and tricycles are responsible for maintenance work within the scope of their respective machines. Failure to perform regular inspections and repairs (such as brake systems, oil, hydraulic systems, lights, various components, etc.) causing mechanical damage and self-repair. Individuals who cause mechanical accidents will be fined 200 yuan. Responsible for accident liability.

Failure to comply with regulations and act recklessly (for example, if a mechanical failure is discovered, the sound is abnormal, the braking system is inflexible, and the knocking on the lever is not in place), etc., there are safety hazards that are not dealt with. The team will be punished with a fine of 100 yuan, and those who act recklessly will be punished with a fine of 200 yuan. Tricycles and slag scrapers must turn on the lights when working underground. If you are found to be working without lights, you will be fined 50 yuan.

Four: Mechanical, electrical and safety control team

; By: Wang Benxue; Xu Bing; Zheng Weidong; Li Yukun; Yang Shengli; Li Qing

Composed, responsible for safety inspection, management, supervision and project quality standard requirements. Actively cooperate with the coordination work of the drilling and blasting team and the slag removal team. Attitudes such as shirk and delay in doing work are strictly prohibited. Zheng Weidong is responsible for the mechanical and electrical work, actively cooperating with the maintenance of various mechanical equipment and installation of equipment, and extension of various lines.

Those who fail to deal with and report safety hazards in a timely manner will be fined 500 yuan. Unpositive, pushy and slow attitude towards work. The penalty for insulting workers is 200 yuan.

For more information about engineering/service/purchasing tender document writing and production to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation: /#/?source=bdzd