China Naming Network - Weather knowledge - Korean S-hook Curtain Hook Threading Solution

Korean S-hook Curtain Hook Threading Solution

Curtain hook method is as follows:

1. Fold the pleats onto the curtain. Leave the unfolded part at the 200 end. As shown in the figure:

2. Hang the pleated belt on the installed pole, fold both ends into 1.3cm, remove the pleated hook, and cut the curtain according to the pleated belt.

3. Fold the lower edge in half, both sides in half, and sew. Make a mark from the front of the curtain to the upper edge of1.3cm, as shown below:

4. The pocket is upward, so that the pleat overlaps with the curtain 1.3cm, and the distance from the edge of the pleat is 6 mm ..

5. Fold the pleats to the inside of the curtain, align them with the upper edge of the curtain and iron them.

6. Put the pleat hook into the pleat, so that it completely enters the pleat, and complete the hanging of the S-hook curtain, as shown in the figure.

Curtains are made of cloth, hemp, yarn, aluminum sheet, sawdust, metal materials and so on. , and has the functions of shading, heat insulation and adjusting indoor light. Curtains are divided into cotton gauze, polyester cloth, polyester-cotton blended fabric, cotton-linen blended fabric and non-woven fabric. Different materials, textures, colors and patterns are combined into different styles of curtains, which are matched with different styles of interior design curtains.

Curtain control methods are divided into manual and electric. Manual curtains include: manual opening and closing curtain, manual bead curtain, manual silk curtain, manual zebra curtain, manual wooden shutter, manual roman blinds, manual organ curtain, etc.