China Naming Network - Eight-character fortune telling - How to adjust the camber of the front wheel?
How to adjust the camber of the front wheel?
The front wheel camber adjustment method is that its end surface inclines outwards, that is, the included angle between the plane where the wheel is located and the vertical plane is adjusted step by step. The following is the introduction of front wheel camber: 1. Influence 1: On the one hand, it can make the wheels roll and slide close to the vertical road surface, reduce steering resistance and improve the portability of front wheel steering control. 2. Influence 2: On the other hand, it reduces the load of the bearing and its lock nut, prolongs the service life and improves the steering safety. In order to prevent the wheel from being easily deformed when it is vertical to the ground and fully loaded, the upper part of the wheel may tilt inward, resulting in damage to the tire joint. Usually, the vehicle deviates from the external octagon angle of about 65438 0 degrees. 3. Negative effects: excessive negative camber will cause unilateral wear on the inner side of the tire; Accelerated wear of suspension system parts; The vehicle will lean to the side with smaller negative camber.