China Naming Network - Eight-character fortune telling - How to clean the accelerator of Buick Regal

How to clean the accelerator of Buick Regal

The method of assembling and disassembling the throttle of Buick New Regal is as follows:

1, gradually before, you must wait for the equipment to cool down, and gradually the next process is not that the hot machine can't be cleaned, but mainly to protect your hands from burns and blisters.

2, pull out the car remote control key, open the car engine compartment cover, support.

3. Remove the battery negative wire, be sure to remove it, otherwise it will be difficult to calibrate the on-board computer motherboard after cleaning.

4. Remove the plastic bottle cap of the automobile engine.

5. Loosen the clamp screw on the intake pipe with a screwdriver and pull out the intake pipe.

6. Remove the three stable screws of the throttle valve.

The method of cleaning the throttle valve is as follows: after removing the throttle valve, put on gloves, install a nozzle for cleaning spray, and aim at the inside of the throttle valve to spray. With a light spray, the inside of the throttle valve will be much cleaner. It is suggested to aim at the dustbin when cleaning, because the carbon deposit will vaporize and flow down at the same time, which is very easy to pollute the natural environment. Moreover, the cleaning agent has a certain irritating taste and corrosiveness, so it is best to wear a mask when using it to avoid the nose, mouth and eyes.