China Naming Network - Eight-character fortune telling - How to change the valve seat cushion of the eighth generation Accord?

How to change the valve seat cushion of the eighth generation Accord?

The replacement method of the valve seat ring of the Eighth Accord: firstly, remove the valve seat ring screw from both sides to the middle diagonal, pry the valve seat ring loose with a grooving knife, and take out the valve seat ring. Clean the valve cover with cleaning agent, install the valve cover gasket on the contact surface between the valve cover and the cylinder head, apply sealant and tighten diagonally from the middle to both sides.

Precautions for replacing the valve seat cushion of the Eighth Accord: Clean the two joint surfaces of the engine and the valve seat cover with genuine paper pad, evenly spread butter on both sides of the paper pad, align the positioning column, cover the valve seat cover, and evenly tighten the valve seat cover with fixing bolts.

Influence of valve seat ring damage;

1. After the valve seat ring leaks oil, it will flow down the cylinder head. Due to the high temperature when the engine is working, the engine oil attached to the engine surface will slowly evaporate, producing pungent smoke.

2. The air tightness of the engine will be affected, and the working pressure of the engine will also leak from the oil leakage. The engine has an exhaust gas recirculation valve connected to the throttle valve, and air leakage will affect the stability of the engine.