Decoration method of office partition wall matters needing attention in office geomantic omen
First, the office partition decoration method
1, method 1: light steel keel gypsum board partition method
Lightweight steel keel gypsum board partition is the most economical. Generally, the partition thickness in office decoration is 100mm, and there are two specifications: 150mm and 200 mm. It is also the best choice to make a special-shaped wall. 100mm thick partition wall adopts 75mm light steel keel, both sides are sealed with 12mm thick gypsum board, and the middle gap is filled with sound insulation rock wool to ensure the stability and sound insulation effect of the wall. Of course, if the sound insulation effect is required to be better, the gypsum board partition wall needs to be connected with the top surface of the original building and must be filled with rock wool.
2. Method 2: Aluminum profile glass partition method.
Aluminum profile glass partition uses aluminum alloy frame as decorative fixing material, and the whole piece of glass (single layer or double layer) is installed in the aluminum alloy frame to form an integral partition wall. Wood-faced wallboard can be customized according to space design requirements. Profile 1.2mm~2.0mm thickness, surface treatment, such as anodic scrub oxidation, powder spraying, acrylic acid and fluorocarbon spraying, electrophoresis, wood grain transfer printing, etc. , can also be sprayed with various colors according to the design requirements, the decoration style is simple, fashionable, good lighting, showing a bright and transparent effect indoors, and can flexibly form any angle. Double-pane glass with built-in venetian blinds can adjust the light at will without cleaning and maintenance.
3. Method 3: frameless tempered glass partition method.
Tempered glass partition and glass door are almost completely transparent, with good lighting, short construction time and high environmental protection coefficient. The biggest feature of frameless tempered glass partition is that there is no reinforced frame around its door leaf (glass). Generally, 8~ 12MM tempered glass is used, which is directly fixed from top to bottom with decorative frames or clips. The ground of the glass door needs to be buried with a ground spring. Glass partitions can be used in any combination with other materials, and are often used in shopping malls, office decoration, etc.
4. Method 4: Mobile partition method
The movable partition in office decoration is also called movable partition, movable partition and track partition. The movable partition floor has no tracks. As long as the guide rail is installed on the ceiling, the movable partition can be freely extended and pushed flexibly. One person can complete the whole partition process. When you need a large space, you can put the partition in a special cabinet without affecting the overall appearance. Movable partitions are lighter and more mobile than ordinary walls, which can save space more reasonably and effectively.
Second, the office feng shui matters needing attention
1, seats cannot go directly to the boarding gate. The door is the entrance and exit of airflow and energy in the whole office. If the seat is facing the door, it is easy to be carried away by the gas field entering the door, which will affect a person's subconscious and mental system, thus being grumpy or sick for no reason. Feng shui master suggested setting screens or plants at the door as a solution.
2. The seat should not face the toilet door. In geomantic omen, the toilet is a place where dirty gas gathers, and the toilet door is a place where dirty gas is discharged. People with seats facing the toilet door will get sick because of too much dirty gas.
The above article mainly introduces how to decorate the office partition wall, and compares several different materials for the reference of those in need. Finally, I also briefly introduced some things that should be paid attention to in office feng shui decoration.