Waterproof construction process of toilet What should I do if the toilet is waterproof and leaking?

The decoration of the bathroom is a very important place, because the quality of the decoration directly affects the mood of the owner. There are many details to be considered in bathroom decoration, such as waterproof and odor emission in bathroom; So how can the bathroom be properly decorated to make the owner have a comfortable environment? Today, let Bian Xiao share some knowledge about bathroom decoration with you.

A, toilet waterproof construction process

1, waterproof construction must be carried out after the completion of hydropower transformation, and the grooves on the wall should be filled with sediment slurry. If there is no water and electricity connection, just brush waterproof material at the slot.

2. Where the wall and the ground are spliced up and down, chamfering must be done, so that the whole wall and the ground can also be effectively coated with waterproof materials to ensure that there will be no breakpoints and avoid water leakage in the later period.

3, the wall needs cement leveling, remember to clean up the original ground.

4. Be sure to level the cement slope of the original ground, and then carry out secondary drainage.

5. The surrounding corners are rounded with cement to facilitate future circulation.

6, waterproof construction, be sure to do a good job of inspection, check whether there is water leakage.

Second, what should I do if the bathroom is waterproof and leaking?

1 If the waterproof layer of the toilet leaks in a small area, you can directly coat waterproof materials on the cracks of the tiles, and then it can be used normally after drying for more than ten hours. If the leakage area is relatively large, it is necessary to replace the original tiles and do waterproof treatment again. Of course it's complicated and it will cost more.

2. The bathroom wall is also prone to water leakage, so the wall should be waterproof before sticking the wall tiles. If there is no strict acceptance at that time, there may be water leakage. Once there is water leakage, it is a very complicated project. This wall needs to be demolished, which will be a very big project. Please ask professionals to make all-round revisions to avoid similar problems in the later stage.

3. Water leakage caused by damaged sewer pipes in the bathroom can be detected by water injection first. If the leakage area is relatively small, it can be wrapped with waterproof tape. If the water leakage is serious, it is recommended to find professional construction personnel to operate.

The above is the waterproof construction process of the bathroom shared by Bian Xiao, and the knowledge about how to do a good job in waterproof and water leakage in the bathroom. I hope it helps you. If you want to know more about toilet waterproofing, please continue to pay attention.