Steps of wall painting and fixing
Choose putty with good quality.
First of all, you must choose good quality putty, which is the condition for putting away putty. Master the proportion of putty and water, and then mix well.
Wall foundation treatment
The foundation of the wall is clean. If there are seams or corners, you need gypsum powder to repair, pat or paste the paper. If you apply putty, you usually scrape it three times. During construction, you must wait until it is relatively dry before scraping putty.
Control the thickness of putty
The thickness of putty should be controlled at about 2mm, which should not exceed the requirements of this size.
Avoid cold weather and paint the wall firmly.
If the weather is cold and there is putty, it is necessary to keep putty. It is necessary to avoid cold wind blowing, so although it seems that it can fly over the wall, it actually blocks the moisture on the wall. Internally, if the next step is taken at this time, the undried wall materials will gradually evaporate and appear "dry crack" when heating in winter.
Thin polishing
Finally, implement thin polishing, and the angle of yin and yang should be horizontal and vertical. When scraping putty, immediately dispose of residue or sand.