What are the precautions for plant decoration?

Workshop decoration is different from ordinary home decoration, with large workshop area, long decoration period, and different decoration steps and emphases.

matters needing attention in plant decoration

1. Is the layout design of the plant reasonable?

we know that the workshop area is generally large, and the layout design process of functional areas, such as fire exits and ventilation, requires higher requirements, because good ventilation is the key to ensure the production environment of the workshop, so we should set the corresponding functional areas according to the production line and demand in the design process, and the layout should be safe, convenient and fast. ?

2. What is the choice of decoration floor materials?

The ground in the factory building is very important, because there is a lot of wear and tear every day, so try to choose durable materials. At present, epoxy floor paint is widely used in the treatment of the ground in the factory building, and some places need to use electrostatic protection floors; In the process of decoration, we must make a reasonable plan for the workshop space and deal with the corresponding ground according to the specific needs. ?

3. top material?

materials with economical benefits, low ignition point and convenient construction should be selected for ceiling construction; In this way, it is more convenient for us to dismantle the factory building in the later period when it is renovated. The materials often used for the ceiling of factory buildings are mineral wool sound-absorbing board, calcium silicate board and so on. ?

No matter which material is used as the top material, it needs to cooperate with the fire-fighting facilities. Usually, the ceiling keel is made first, and then the pipeline facilities for spraying and smoke detection are installed in the fire-fighting project. After all the ceiling materials are capped, the spray head and smoke detector are installed in the fire-fighting facilities. ?

4. the choice of partition?

In the process of decoration, some areas should be reasonably divided into different functional areas, so it is necessary to divide them with partitions made of different materials. These partitions can all play the role of division, but they represent different styles. ?

5. Fire fighting approval?

for the sake of safety, you must not neglect the installation of fire-fighting equipment. Before installing fire-fighting facilities, you need to go to the local fire station for approval, and you need to report for approval after the project is completed. Generally, it takes about 1 days to complete the fire-fighting formalities for approval, so the fire-fighting company should be consulted before the decoration. ?

what are the four main points of factory building decoration?

1. Safety?

The most important thing in factory decoration is safety: no matter what factory is opened or decorated, safety is in the first place. In many factory decoration, we need to get through some places to ensure enough space for the equipment in the workshop. At this time, we need to pay attention not to damage the load-bearing structure and building structure of the house. Moreover, because of the large area and uniform materials in the decoration of the factory building, we must be environmentally friendly in the use of materials to prevent decoration pollution; In addition, there are generally more electric devices in the factory building and more electricity, so for hydropower materials and hydropower construction projects, the decoration of the factory building should be one or two grades higher than that of the construction industry; In a word, the safety factor of the factory building is much greater than that of other construction projects. ?

2. practicality?

in the design of plant decoration, we should meet the use function of the plant to the maximum extent. If any plant decoration loses its use function, it will lose its meaning of existence. Therefore, we need to deal with the design of the use function of different plants in more detail. It is good that a good plant decoration is not in line with the regulations. As a decoration company, we also pursue a better sense of use from customers. ?

3. Economy?

as a decoration company, we need to use as little money as possible to achieve a satisfactory factory decoration effect when designing decoration, which is the economic principle of tooling. Such economic considerations usually have an impact on the beautiful decoration of our factory buildings, but as decoration designers, we must solve such problems, and we need to fully consider the cost performance and reasonable collocation in the scheme. Provide customers with quality and preferential solutions. ?

4. Beauty?

The aesthetics of the factory building is also a place that a qualified decoration company needs to consider when decorating. The aesthetic principle of the factory building is to be artistic. That is to say, it should meet your personal aesthetic needs, but also meet the public's aesthetic. A beautiful factory can also enhance the goodwill of the corresponding cooperative customers of the factory to the products produced by the factory.