How to replace the water tank of Buick Hideo heater?
Need to go to 4S shop or repair shop for disassembly and replacement.
The replacement method of Buick Hideo water tank is to remove the front bumper, condenser and water tank frame of the vehicle first, then remove the water tank and replace it with a new one. Lavida water tank is in the front engine compartment, near the engine. Do not open the lid when the water tank is marked with high engine temperature. Ordinary water (tap water, mineral water) can't be filled into the car water tank. It is necessary to fill the automobile engine coolant (it does not freeze at low temperature and does not boil at high temperature 100), and the coolant will not produce scale, which can ensure the cleanliness of the engine waterway. The maintenance method of automobile water tank is as follows:
1. Stop the car and turn off the engine. When the coolant temperature drops, open the expansion kettle and fill it with water tank cleaner.
2. Start the engine until the cooling fan works, and then idle for 5- 10 minutes;
3. Turn off the engine and remove the front bumper of the vehicle. When disassembling, make sure that all the fixing screws have been unscrewed, and then slowly disassemble from both ends to the middle, and never break the fixing buckle;
4. Ensure that the coolant temperature is completely cooled, then discharge the tank cleaner together with the coolant, and finally replace it with a new engine coolant.