On the problem of u disk installation system

If you really want to use a USB flash drive as the system, that is to say, there is a system (general ghost system or local backup ghost system) on this USB flash drive, then you must use a USB flash drive of more than 4G. Copy the ghost backup system to a USB flash drive and restore it through the ghost interface. The operation is simple, but it takes half an hour to restore the backup. Usually, one-click recovery means that the system backs up the computer hard disk. But now, if you back up on a U disk (if you back up on a mobile hard disk, it will be as fast as on a computer hard disk in five minutes), you can back up and restore the U disk, mobile hard disk and hard disk as long as you enter the ghost interface. If you use ghost to install the system, it is the most primitive and simple.

1. Install the system on the USB flash drive of the computer:

1. Use a USB flash drive above 4G, because the backup system may be around 2G. The size of the USB flash drive can be selected according to your actual situation.

2. The USB flash drive is used as a startup disk. First, divide the USB flash drive into two areas (area A.B). The partition of the startup disk is only enough to put the startup disk file, 256m m, and then the A area is used as the startup disk, and the B area is used as the backup system file, or something else.

3. Copy the backed-up ghost system to area B of the U disk and put it in the folder created in area B (beifen), but it should be named by letters.

4. Restore the system. Enter the dos interface: it must be reminded that in fact, the A.B area of the U disk has become C.D at this time.

Here we are. A: > /B: Enter, b: > /cd double press enter, b: > /& lt； & ltBEIFEN & gt& gtGhost enters the ghost interface. Just follow the normal operation. As long as you can enter the ghsot interface, you can find everything on the disk.

2. If you use the U disk backup system, you must first copy a ghost file in the doubling folder in the B area of the U disk, and then use it as a backup file. The operation will enter the ghsot interface as before, and only need to be backed up to the Beifen folder in the B area of the U disk.

The question you asked above is correct. You should first back up your current system to a USB flash drive. If you have a startup disk, you should use ghsot to back up the system to the hard disk first, and then copy it to the U disk. Because in principle, ghost backup is a ghost-to-computer system, of course, there is also a general ghost pure version system, and other computers can also use it, but there is no such compatibility.

Your system is WINDOWS SERVER2003. Pancheyuan is to back up your system to a USB flash drive. It is said that the third one will be backed up to your USB flash drive, or the second one can be backed up directly to the USB flash drive.

The text is very troublesome, and the actual operation is particularly simple.