Where are the windows of rural buildings installed in the wall?

In recent years, due to the need of work, I have traveled all over the country for many years, and I have also seen many different installation methods of rural residential windows, such as the installation method flush with the external wall, the moderate installation method in the wall and the installation method flush with the internal wall. For self-built houses in rural areas, I personally prefer moderate installation methods. Why do you say that? Watch me analyze it carefully.

▲ Advantages of Windows1moderate installation: it can play a very good waterproof effect. At present, in terms of the wall width of rural self-built houses, due to the cold weather in the north, the wall is mainly 37mm, and the south is mainly 24 mm

The window frame is installed in the middle of the wall, and there is a lot of rain in the south, so most of the rain will be blocked by the outer wall. Even if it falls into the frame door, there is little rain, and because there is drainage at the lower opening of the window frame, it will not seep back into the wall in time.

The weather in the north is windy and dusty, the temperature is cold, and the installation is moderate. Part of the sandstorm will be buffered by the wall, which will not cause the sandstorm to hit the window directly.

2. The window is installed in the middle of the wall, which is convenient to install. In order to guard against theft and safety, security window now has rural self-built houses. Security window is installed in almost every household, especially on the first floor. If the window frame is installed flush with the external wall, then the security window will not stand out, which will affect the usual activities and is easy to bump.

The window frame is installed in the middle of the wall, so the security window can be installed flush with the external wall, which will not bring any impact on life.

3. The window frame is installed in the middle of the wall, which is more firm. As we all know, the middle of the wall is a brick-concrete structure, and the installation and reinforcement mainly rely on expansion screws. Expansion screws are the strongest. If different window frames are installed on the outer wall plane or the inner wall plane, they will hit the paint layer carelessly, and the expansion screws are not tightened, which will easily cause the paint layer to fall off and damage the wall surface.

4. The window frame is installed in the middle of the wall, which is also conducive to indoor decoration. As mentioned above, the window frame is installed in the middle of the wall, and the outer wall does not block most of the rainwater, so the probability of window frame seepage is greatly reduced, and the damage to the interior wall decoration due to seepage is also reduced.

Another point is that the window frame is installed in the middle of the wall, which is also beneficial to the interior decoration design. Both the window sill and the window cover will look exquisite.

▲ Precautions for installing windows in the middle of the wall At present, most of the windows of rural self-built houses are mainly sliding windows, which are both wind-proof and rain-proof, and the water holes of the slideways are basically outward, which also causes the installation of sliding window sashes from outside to inside. Therefore, when installing the window frame, security window should be used to reserve the space for hanging the window sash, which is convenient for disassembling and cleaning the window sash in the future.

In addition, there should be a certain slope between the height of the lower edge of the window frame and the security window to facilitate the rainwater to flow out. It is suggested that the gap between the window frame and security window be paved with ceramic tiles to facilitate cleaning.

Before installing the window security window, be sure to seal the window in advance, otherwise it will be difficult to show it when installing the security window window seal.

Conclusion In rural self-built houses, it is suggested that windows should be installed in moderate walls. First, it is the strongest in the middle. Second, disassembly is more convenient. The window sash has a temporary foothold. Third, it is conducive to decoration.