How to disassemble the polo small water tank

How to disassemble the polo small water tank: 1. Drain the liquid in the water tank; 2. Unplug the cooling fan and disconnect the water pipe; 3. Remove the fixed bracket on the front frame. Lift the water tank.

The Volkswagen Polo water tank switch can be found in the engine compartment near the right front wheel. To open it, just turn the filler cap counterclockwise. To replace the coolant, you need to lift the vehicle and remove the water tank drain pipe to drain the water tank.

There is a clamp at the lower pipe of the Volkswagen Polo engine. You need to use tools to pry it open. Be careful of coolant splashing when discharging the coolant. If the coolant has not cooled down, there may be a risk of burns.

The car water tank, also known as the radiator, is an important part of the car cooling system; its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator, dissipates the heat, and then returns to the water tank. into the water jacket and the cycle continues. Thereby achieving the effect of heat dissipation and temperature regulation. It also dissipates excess and useless heat from the engine, allowing the engine to operate at normal temperatures at various speeds or driving conditions.

To disassemble the Volkswagen Polo's heater water tank, you need to go to a car repair shop for disassembly. It is not recommended to disassemble it yourself to avoid damaging the car's heater water tank components.

A clogged heater water tank is also a possible reason why the heater is not hot. The structure of the heater water tank is actually a reduced version of the engine water tank radiator. There are many small heat dissipation pipes inside, which are easy to get clogged inside like the water tank radiator.

(Pictures/Text/Photos: Q&A Calling the Beast) @2019