Ps cartoon illustration effect -PS tutorial on making cartoon effect from photos

1. How to turn a real photo of a character into a cartoon character with photoshop

The operation is as follows: 1. First, find a photo of a character and open it with PS software.

2. press the shortcut key Crtl+J to copy the layer. Click the eye in front of the background layer to hide the background layer.

use the pen tool to click on the edge of the character to form a closed path, right-click to create the selection, press the shortcut key Ctrl+Shift+I to reverse the selection, and then press Delete to delete the selection. 3. Click the filter -> Liquefaction, use liquefaction tools to adjust characters.

First, cover your body with a frozen mask and adjust your face. After the face is adjusted, cover your face with a frozen mask and adjust your body. Click OK after adjustment. 4.Ctrl+J copy the layer.

execute the filter -> Artistic effect -> Paint and smear, set it as shown below, and click OK. Set the layer blending mode to overlay and the opacity to 65%.

use a smudge tool to smear hair, eyebrows, etc. Right-click Copy of Layer 1 and click Visible Layer.

5. Create a new layer, open a picture and copy and paste it into the layer as the background. Move the layer under "Copy of Layer 1".

Ctrl+T adjusts the background size and press enter. Right-click Copy of Layer 1 and Merge Visible Layers.

6. Execute the filter -> Texture -> Texture, set the scale, highlight the value, and click OK. At this point, the task is completed.

a photo of a real person becomes a cartoon.

2.ps How to make people's photos into animation effects

1. Modify the picture resolution, 2~3, and the pixel size is about 1M.

2, and then color matching. 3. Copy two layers of the background layer. The copy mode of layer 1 is soft light, and the middle value of layer 1 is 5.

4. execute filter-other-Gao Fancha reservation on the copy of layer 1, with the value of 85, and then ctrl+e will merge the layers down. 5. Then copy Layer 1 for another layer, and execute the filter-noise-intermediate value with the value of 7.

6. Create a white mask on the copy of Layer 1, and wipe out the five senses with a black brush. The opacity of the brush can be smaller, and then merge downward, and the skin of this picture is completed. 7. Now do the hair again. Use the quick selection tool to roughly select the hair. After feathering for 12 pixels, ctrl+j copies one layer.

8. Apply along the direction of hair with an applicator, and adjust the size and strength of the applicator at any time. The left side is smeared. 9. Adjust the color after all smearing. If you feel that the broken hair on the side is not easy to handle, you can use a brush to absorb the background color and cover them. Use the deepening and lightening tool to lighten the bright and darken them.

1. Tick out the path with the pen tool. Follow the hair, absorb the darker color on the hair, not black, stroke with a brush, and then blur with a box. The value is 12. 11. Create a new layer, fill it with black, change the mode to color lightening, use a white low opacity brush to point on the hair, and the highlights will come out. You can also use a pen to tick the path on it and use a white brush to stroke.

12. Finally, add some fine hair, the brush size is about 5, and the color is darker, so it is finished.

3. How to use photoshop to turn a real photo of a character into a cartoon character

The operation is as follows:

1. First find a photo of a character and open it with PS software.

2. press the shortcut key Crtl+J to copy the layer. Click the eye in front of the background layer to hide the background layer. Use the pen tool to click on the edge of the character to form a closed path, right-click to create the selection, press the shortcut key Ctrl+Shift+I to reverse the selection, and then press Delete to delete the selection.

3. Click the filter -> ; Liquefaction, use liquefaction tools to adjust characters. First, cover your body with a frozen mask and adjust your face. After the face is adjusted, cover your face with a frozen mask and adjust your body. Click OK after adjustment.

4.Ctrl+J copy the layer. Execute filter -> ; Artistic effect -> ; Paint and smear, set it as shown below, and click OK. Set the layer blending mode to overlay and the opacity to 65%. Use a smear tool to smear hair, eyebrows, etc. Right-click Copy of Layer 1 and click Visible Layer.

5. Create a new layer, open a picture and copy and paste it into the layer as the background. Move the layer under "Copy of Layer 1". Ctrl+T adjusts the background size and press enter to confirm. Right-click Copy of Layer 1 and Merge Visible Layers.

6. Execute the filter -> ; Texture -> ; Texture, set the scale, highlight the value, and click OK. At this point, the task is completed. A real photo becomes a cartoon

4. How to use ps to turn a photo into a cartoon character

The detailed process is as follows: 1. Open the photo to be modified with PS.

2. click "filter". 3. Select "Fuzzy".

4. click "Gaussian blur". 5. Set the parameters and click OK.

6. click "filter" again. 7. Select "Filter Library".

8. click "artistic effect". 9. Select "Dry Brush".

1. click "ok" after adjustment. 11. Click "Create" the white layer.

12. set the opacity to 2%. 13. Check the outline with the pen tool.

14. Then delete the white layer. 15. Open the "Image".

16. open "adjustment". 17. Click "Curve".

18. Adjust according to personal habits. 19. The final effect is shown in the figure.

:AdobePhotoshop, abbreviated as "PS", is an image processing software developed and distributed by AdobeSystems. Photoshop mainly deals with digital images composed of pixels.

With its numerous editing and drawing tools, you can edit pictures effectively. Ps has many functions, including images, graphics, text, video, publishing and so on.

Adobe supports Windows operating system, Android system and MacOS, but users of Linux operating system can run Photoshop by using Wine. Photoshop is one of the most famous image processing software of Adobe.

Most people only know Photoshop as a good image editing software, but they don't know its many applications. In fact, Photoshop has a wide range of applications, including images, graphics, text, video, publishing and so on. References: PS_.

5. How to turn a real-life picture into a cartoonist with ps

1. Extract the characters. The pure white background in the portrait can easily extract the characters.

use the quick selection tool (w). 2. Isolate the head from the clothes.

cut out the elements of the character. The body and clothing layers should follow the neckline of his shirt.

3. Turn each layer into a smart object. Grab each layer separately, layer >; Smart objects > Convert to smart objects.

in order to prevent the loss of picture quality due to deformation. 4. A common comic technique is to make the proportion of the head very large.

to do this, you must shrink the body layer and edit >; Free transformation. 5. Use Edit > Transform > Deformation, began to shape the first layer.

fit the neck to the neckline of the shirt and expand the head. The purpose of this step is only to establish the basic shape of the head, and it is the basis of other layers.

6. Twist and lengthen the previously cut chin and polish it slightly. Make it as consistent as possible with it, and such seams are not too obvious.

7. In the same way, do the same for other parts cut before. 8. Now add layer mask to each layer, and treat each layer with soft black paint to connect them into a coherent whole.

9. Use a forward deformation tool, about 2 brushes in size, to increase the size of your forehead and gently push your skin toward the hairline. 1. Use the freezing tool to raise the protruding spectacle frame.

It is mainly used to prevent the distortion of the frame, which is convenient for us to deal with the eyes later. 11. After the liquefaction effect is applied, the effect should look like this.

12, finally adjust the color to complete the final effect. .

6. How to change the character photos into cartoon style in PS

can be done by hand drawing.

hand-drawing (also known as hand-drawing imitation and mouse-drawing) is a kind of image processing method that uses drawing software and image processing tools (sai, photoshop, etc.) to transform people or landscape photos into similar hand-drawing effects. Nowadays, more and more people use graphics tablet to paint, and hand-drawing components are increasing.

Common tool settings for hand drawing:

Pen stroke: Set the brush size and color. Sketch with a pen, right-click to stroke the path, uncheck the simulated pressure (you can then erase the corners with a soft-angle eraser), confirm, and then select Esc to delete the path, or right-click to delete it.

brush opacity: the setting is about 2%-3%.

Gaussian blur: filter-blur-Gaussian blur. The value is between 3 and 5.

color absorption: select the foreground color, and then click on the part of the original image that needs to be absorbed to confirm.

simulation pressure: first select the brush size and color, then select the brush setting box in the upper right corner (you can also see it by selecting window-brush), and select the pen pressure for other dynamic and opacity jitter control.

general steps:

1. process the picture as a whole. (such as removing logo, noise, etc.)

2. Treating skin (commonly used "Gaussian blur" to make skin smooth)

3. Treating eyes (using pen tool to outline eyes and deepen eyebrows)

4. Treating nose (using pen tool to outline nose, depicting nose highlights through white highlights and Gaussian blur)

5. Deepen the edge of the mouth and adjust the color of the lips)

6. Treat the clothing (choose the quick mask tool, select the clothing area and perform the surface blurring operation)

7. Treat the hair (choose the quick mask tool, select the hair area and perform the surface blurring operation)

7.ps Tutorial: How to turn people's pictures into cartoon pictures

1. Use PS. Press CTRL+J to copy the layer. 2. Perform filter-liquefaction to enlarge the eyes in the person photos. 3. Liquefy the eyes. Copy the layer, remove the color, filter-blur-Gaussian blur, and set the radius of Gaussian blur to about 4 pixels. Then change the layer mode to soft light and adjust the transparency. This is also a kind of skin grinding. There are many methods to grind the skin. You can also use other methods to grind the skin. This is not stipulated. 4. To start makeup, first draw eyeliner, check the shape dynamically in the brush preset, create a new path, stroke the path, check the brush to simulate the pressure, and after painting, filter-blur-Gaussian blur is processed, and the radius of the model is about .7.

5. Then draw eyelashes in the same way, and draw eye lines for the eyes. Sixth, after painting eyeliner eyelashes, we add a pupil brush to the eyes to reduce the transparency of the brush and change the layer to soft light.

7. Gently tap the eyebrows with a splash brush, then use the smudge tool to reduce the opacity and smear them on the eyebrows, and draw them. Eight, use a dark brown brush to reduce the opacity. Make a bottom on the eyeliner. Nine, after painting, color the skin, avoid the eyes and mouth when painting. Then, the layer mode can be changed to soft light filter, and then reduce the opacity. Ten, dye the hair. I use brown here. You can also choose your favorite color, the opacity is about 5%, the layer is changed to color, and then you can use an eraser to wipe off the excess.

XI. Change the highlight mode of the brush to soft light. 12. Create a new path again, and start drawing hair with the pen tool. The amount of hair depends on personal preference, and drawing more points looks fake. 13. After the hair is drawn, use the filter-blur-Gaussian blur, and the radius of the blur is smaller. See the effect can be repeated several times. 14. It's almost the same. Now add some blush, layer mode, and color to adjust the opacity of the blush.

15. In the copy of the layer, use the lightening tool to wipe out the whites and highlights of the eyes, and then use the deepening tool to paint out the black parts of the eyes to make the eyes look brighter.

8. How to turn a photo into a cartoon with ps

Using software: PhotoshopCC

Using PS to turn a photo into a cartoon and an illustration style is as follows:

1. Pre-preparation

Prepare the photo to be processed (with a larger resolution) and the animation-style sky material. The original picture used here is:

Note: This tutorial is only suitable for dealing with landscapes, not people. Moreover, the treatment of scenery is not suitable for dynamic objects such as vehicles and running water, so it is actually quite picking photos.

2. Oil painting filter

Now I think the "dry brush" filter in the original tutorial is useless, so I have only used the "oil painting" filter. The Oil Painting filter is located in the Filters menu, and PhotoshopCC214 may not have this filter.

the six parameters currently used are ".1", "5", "1", "", "" and "". You can use the values of these parameters as a reference first, and then you can grasp them yourself after doing more. If the effect of the filter is not strong after use, you can double it by Ctrl+F(Mac is _F).

3, CameraRaw filter

Although the "oil painting" filter is very important, you may not be able to detect any obvious changes at this moment. Don't worry, you will see the effect after using the "CameraRaw" filter. This filter is located in the Filter menu in PhotoshopCC.

As shown in the figure, the exposure is +1, the contrast is minimized, and the shadow, black, clarity and natural saturation are maximized.

4. The sky is changed

Cut out the blue sky, and then put on the prepared animation style sky material (continue to be lazy to use Makoto Shinkai's clouds). There are many matting methods, so I won't repeat them here. If the sky in your original film is pure blue or pure gray (that is, there are no clouds), it only takes 1 seconds at most to use the magic wand tool.

after changing the sky material, remember to adjust the exposure of the sky with "curve" or other tools to make it coordinate with the foreground. In fact, up to this point, a good work has been completed for most people.

5. Final repair

The contrast of cartoons and movies is lower than that of photographic works, so I often add an "adjustment" layer to reduce the contrast in the final repair.

In addition, you can also observe the use of colors such as blue-purple (dark part) and warm yellow (bright part) with low saturation in Makoto Shinkai's works, and adopt "color balance" and other ways.