What are the shortcut keys for Lumion?

Setting accuracy of F 1, F2, F3 and F4

F9: Distant objects and trees are completely displayed and switched.

Ctrl+f 1 1: Switch between full screen and non-full screen.

H: height conversion

R Press shift when rotating to rotate in 45-degree increments.

Save the page where the viewing angle is set: ctrl+ NUMBER keys (also use ctrl+ NUMBER keys to save after modification).

Batch addition: select materials and press ctrl.

Random resizing: left mouse button +z Select multiple objects: left mouse button drag +ctrl.

Add a selection set: Left-click drag +ctrl+shift.

Copy: press alt key to fit the ground when moving; g fit the solid first when moving; f fit all faces except plants (including terrain) when moving, and keep the existing height when moving, without fitting any face; press when moving.

First, lumion advanced mode

If you turn off the additional options displayed in the settings, you can turn them off by pressing [CTRL].

Show it.

Zoom icon

In the movie animation mode

-& gt； SaveMovie saves animation: MP4 or image sequence.

2D or 3D (stereoscopic image)

Rendering, extra bounding box

(This will increase the rendering time, but it will eliminate the problems caused by boundaries.

Gaudre /SSAO Labor

Import/object mode,

When the object gizmosj is moved, extra rotations are displayed, etc.

exist

Traces).

Second, select, copy, move and align objects.

[CTRL]+ left mouse button square selection.

[ALT]+ Move and copy the selected object.

[Escape] You can drag the moving object directly with the mouse, press [H] to move the height of the object, and press [R] to move the object.

Body rotation.

[G] When pressed, the capture is temporarily turned off. When moving or inserting an object, press the [G] key to temporarily turn off object snapping.

[F] Press down. When moving an object, the direction of the object can be aligned with the normal direction of the hillside, except for trees and plants.

[CTRL]+[f] When moving an object, you can align the selected single object with the direction of the object below it.

[Shift]+ Move temporarily turns off snapping. Turning Snap off will cause the moving object to float in the air or overlap with other objects.

[CTRL]+ Same height, so that the selected object and the clicked object have the same height.

Press [CTRL] to select an object-> Modify object-> Click the menu icon of the object whose height you want the selected object to inherit->; Transform (~ transform)->; Same height (_ profile)

[CTRL]+ space, same as above.

Third, save the camera settings.

Suitable for weather/landscape/import/object mode

[Ctrl]+1to 9, and save 10 camera positions.

1 to 9, and load the storage location of the corresponding camera.

Fourthly, high resolution texture mapping.

Suitable for importing model patterns

[CTRL]+Reloadbutton Lumion will ignore the built-in map size and try to make the model fit you.

The loaded map will use its original resolution.

5. Manually update the reflected light and sky stereo map.

Applicable to all modes

[CTRL]+； Manually update the sky stereogram and lights (this graph is usually updated only when the weather part updates the sky/

Lights, just updated).

Sixth, the navigation bar

Suitable for: weather/scenery/import/object/animation mode (photo) mode.

[W/ Up Arrow] Move the camera forward

[CTRL]+[F 1 1] Full-screen display navigation [F 1 1] Maximum window display shows/does not show the taskbar (press twice)

(W)/ (up arrow): Push the camera in.

(S)/ (down arrow): Leave the camera.

(A)/ (left arrow): Turn the camera to the left.

(D)/ (right arrow): Turn the camera.

Q: The camera has been moved.

(3: taken by the mobile phone camera.

(Space bar) +(W/S/A/D/Q/E): Moving the camera is very slow.

(SHIFT+(W/S/A/D/Q/E): moving the camera is very fast.

(SHIFT)+ (Space bar) +(W/S/A/D/Q/E): Moving the camera is very fast. Right mouse button+move the mouse: look around.

Middle mouse button+move mouse: pan.

Mouse wheel up/down: Move the camera forward.

(CTRL+(H): Resets the viewpoint of camera spacing level.

(O)+ Right mouse button: Tracking camera.

Double-click the model with the right mouse button: immediately "send" it to the location you clicked.

odds and ends

(F 1): editing quality:

(F2): Editing quality:

(F3): Editing quality:

(F4) Editing quality

(F5) quick save (save a file named

(F7) View the highest detail level of Lumion terrain.

(F9): If you press F9, all the trees and plants in the viewport will be rendered at their best detail level, which is easier to see. You need to add more trees and plants to the scene.

Home-> (ctrl)+(f11) full screen.

Home-> (f11) Maximize the taskbar with/without windows (press the key twice to switch).

Sliders You can double-click all the sliders in Lumion to manually enter values. Press the Shift key to adjust the slider value for fine adjustment (more numbers will be displayed after the decimal point).

Save and load the camera perspective.

(CTRL)+( 1)(2)(9)(0): You can save up to 10 camera positions with this function.

(SHIFT)+( 1)(2)(9)(0): camera view saved before loading. Saved slots can also facilitate thumbnails in photo mode.

(F 12): Place the model mode, you can directly click and drag the mouse to move to the moving object.

You can move objects up and down, while (r) allows you to rotate.

(g): This function will capture the objects you move or place in the scene.

Type.

(f): The direction of all objects (separated from trees/plants) can be adapted to the angle of the surface of other objects. Move objects button-> press "Splice" in (f)-> to move objects so that they can adapt to the angles of other objects' surfaces. This function only applies to surfaces facing the sky, that is, surfaces less than 90 degrees.

(SHIFT+ Move Selected Object): Press the key when dragging the selected object to move horizontally and the alignment is off.

(SHIFT)+ Rotate/Pitch Rotate/Rotate the object selected by the bank: For the rotated object, temporarily break the 45-degree angle and press the SHIFT key.

(K)+ Rotate/Pitch Rotate/Rotate the object selected by the group: Press the (k) key when rotating the object so that all the objects face the mouse cursor.

(CTRL)+ Same Height command: The selected object will be placed at the same height as the clicked object. (CTRL)

-select object-> right-click menu-> click the icon of the height object with other objects to inherit-> transform->

Same height.

(CTRL)+"SPACE" command: The selected object will be placed on a straight line, which is the object definition of the object farthest from the object when you click the command to be executed. (CTRL)- select object-> right-click menu-> click the selected object.

A selection icon-> transform-> space).

Align command: this command allows you to concentrate the selected objects so that their pivot points are all in the same position (CTRL- select objects-> right-click menu-> transform-> align). If you need to move or manipulate one of the overlapping objects, please put the mouse in a bright place.

Mark small overlapping object selection icons and use the up/down (W/S) keys to switch between objects.

(l): Zoom mode.

(r): rotate the title.

(p): Rotation spacing.

Circulating bank.