China Naming Network - Ziwei Dou Shu - Why doesn't the universal rotary faucet come out after installation?

Why doesn't the universal rotary faucet come out after installation?

1. Water valve is not open: after installation, you need to open the water valve to let water flow through the faucet. If the water valve does not open, the faucet will naturally not produce water.

2. Internal blockage of faucet: During installation, sundries may enter the faucet, resulting in internal blockage of the faucet and the normal flow of water. At this time, it is necessary to remove the faucet and clear the blockage.

3. Insufficient water pressure: If the installed faucet does not produce water, it may be caused by insufficient water pressure. You can check whether the water pressure is normal, or contact the relevant water department to see if there is any problem with the water pressure.

4. Installation problem: It is also possible that there are some problems during installation, such as the connector is not fixed properly, or the connector leaks water, resulting in the faucet not discharging normally. At this time, it is necessary to check whether the installation is correct, reinstall or adjust the installation position.