What is the best way to partition the restaurant as soon as you enter the door? How to partition the restaurant that is facing the entrance door?
We all know that different houses have different areas and different layouts. Some houses face the living room as soon as you enter, some houses face the corridor as soon as you enter, and some houses face the corridor as soon as you enter. Facing the restaurant and so on. So how to design a partition in the restaurant that is right after entering the door? Let’s take a closer look below! Opening the door is how to partition the restaurant. Restaurant booth partition
The entrance directly faces the restaurant, and the booth is 1-1.2 meters in front of the entrance door, with a glass partition or a hollow partition above. Make a shoe cabinet on the left or right side of the entrance door.
If there is no suitable location on the left and right sides, the shoe cabinet, card holder and partition can be built together. One side is a card holder and the other side is a shoe cabinet. Craft glass partition
Make a glass partition between the entrance and the restaurant, which has better permeability. It can be made of translucent glass or craft glass, which transmits light and has a certain decorative effect. Fully shielded partitions
Decorated with wooden boards, they can completely block the partitions of the restaurant. The restaurant has better privacy, but the light in the foyer will be poorer and requires lighting assistance. Cabinet partitions
Use entry shoe cabinets or coat cabinets as partitions, which are practical but bulky. Screen partitions
Use a wooden frame and then use translucent paper or cotton and sand embroidery to make screen partitions. Indoor window partition
Use it as a partition in the form of an indoor window, and make a shoe cabinet under the window. This kind of window should be done well and look good.
There are many forms of partitions. You can design them according to your own situation. You can still avoid them if possible. Partitions also take up indoor space. For houses with a small area, try not to make them unless it is very important. It is necessary. When you open the door to see the restaurant, there are generally two situations: the restaurant is facing the entrance door and the restaurant is on the side of the entrance door. 1. The restaurant is opposite the entrance door
The restaurant is opposite the entrance door. I think the partitions are set up with the partition in the "front" and the restaurant in the "back"; the restaurant is in the "left" and the partition in the "right" "; There are several ways to make "partitions" in the "back", the restaurant in the "front" and the component foyer.
⑴The partition is in the "front" and the restaurant is in the "back"
The partition is set in the "front" of the restaurant, dividing the original restaurant space into "two" and "one space" Use it as the entrance area to enrich the functional area of the family space, "buffer" the sense of urgency of the restaurant when you enter the house, and also effectively prevent shoe cabinets, shoe changing stools, clothes racks and other functions from being "mixed into one" with the restaurant. The embarrassing phenomenon has given them their own "exclusive area"; while the other space is still used as a restaurant, and the dining table, dining chairs, sideboards and other functions are selected according to the functional needs and area of the family.
The area of the entrance area is larger, and partitions and functional objects (such as shoe cabinets) can be set up separately, and the style of partitions can be selected more freely; the area of the entrance area is smaller, and partitions and Functions such as shoe cabinets can be set up "in one" to save space and "one thing has multiple uses". However, because it needs to be "connected" to other items, the choice of partition styles will be restricted to a certain extent...
⑵ The restaurant is on the "left" and the partition is on the "right"
The restaurant is small and close to the entrance. You can choose to set the partition on one side of the restaurant, which will not "reduce" the area of the restaurant area. , which makes the entrance feel cramped, and also has a certain degree of "blocking" effect on the family space.
Since it is close to the entrance to the house, a shoe cabinet can be set up as a "partition", which solves the "awkward situation" of the shoe cabinet having no space and is easy to use; when the restaurant has a booth, use the depth of the booth By setting up an "embedded" shoe cabinet, the dining room and the shoe cabinet become "one", which can make the shoe cabinet achieve a better "invisibility" effect and weaken the "sense of presence" of the shoe cabinet!
⑶The partition is in the "back" and the restaurant is in the "front"
Either the dining table needs a "backer", or the area adjacent to the restaurant needs to be set up with functions ( For example, the living room area connected to the restaurant needs a TV wall, and a partition is used as a TV wall), or if you want to separate the restaurant from the adjacent area, you can choose to set up the partition in the "back" and the restaurant in the "front" . However, if the restaurant area is small and close to the entrance, it will easily create a sense of chaos at the entrance and needs to be sorted out in time.
The setting of the partition does not necessarily have to be "near" the entrance door. Finding a suitable location is the most important...
⑷Construct the foyer as a "partition"
Constructing a foyer as a "partition" at the entrance of the home will give the family a "sense of ritual" when entering the home. Setting up functions such as shoe cabinets, shoe-changing benches, and clothes racks will make the foyer more "full"; however, Since the foyer has a strong sense of space, it is easy to feel cramped due to its small area. Partitions or shapes with good "transparency" can alleviate this situation to a certain extent. 2. The restaurant is on one side of the entrance door
The restaurant is on one side of the entrance door, and the guest and dining rooms are on both sides of the entrance door. The guest and restaurant are on one side of the entrance door. There are three types of apartments: "upper and lower arrangement". Different apartment types have different partition settings.
⑴The living room and dining room are on both sides of the entrance door
The living room and dining room are on both sides of the entrance door. I think the partition is set up on one side of the dining room or in the living room. One side is perpendicular to the wall, and the partition is set opposite to the entrance door.
①The partition is set perpendicular to the wall on the side of the dining room or the living room.
In apartments where the guest and dining rooms are on both sides of the entrance door, the partition is set on the side of the dining room or living room. The side perpendicular to the wall is the most commonly used method. I think you can refer to the following points to choose which side to set the partition on: the area of the area, because the setting of the partition will limit the functional area to a certain range. If the area is larger Partitions that are small and have poor "permeability" will make it feel cramped, so I think it is more suitable to set the partition on the side with a larger area; according to living habits, partitions with functional functions (such as shoe cabinet partitions) should be used according to daily life. It is customary to choose to set it up on the side of the living room or dining room, and it is also important to use it smoothly in the home; personal preference, the first thing you see when entering the house is the functional area without partitions, and the functional area with partitions will be temporarily "hidden" , so which side you like to see when entering the house, set the partition on the other side; for house types, sometimes one side of the home will be seen when opening the door, so set the partition on one side of that functional area. Blocking...
When setting up partitions on one side of the living room, you need to pay attention to the width of the partition. A partition that is too wide will "obstruct" the placement of furniture in the living room area, so the width of the partition is usually equal to or slightly larger than The width of adjacent furniture...
②The partition is set opposite the entrance door
The partition is set between the guest and dining room opposite the entrance door, which can provide more privacy in the home. The "quiet zone" (such as the gathering area of quieter spaces in the home such as bedrooms and study rooms) is blocked, effectively preventing the home from being "unobstructed"; it can create a high-end and atmospheric space effect, which is perfect for entrance doors and House types with opposite functional space doors (such as bedrooms and bathrooms) are also more suitable...
Since the partition is set up between the guest room and the dining room opposite the entrance door, the width of the partition must be wider than the entrance door. In the case of a door, you need to leave two areas on both sides with the size required for normal use. I think this size is determined by the size of the furniture and the number of people who live in the home for a long time. About 1.2m can satisfy two people passing through at the same time.
⑵The guest room and the dining room are on the same side
For apartments with the guest room and the dining room on the same side, partitions are generally set vertically to the wall on one side of the guest room and the dining room to block the space. use.
⑶ Guests and dining rooms are arranged "up and down"
I think the partition setting method of the house type where the guest and dining rooms are arranged "up and down" is that the partition is facing the entrance door. and building a foyer.
①The partition is opposite the entrance door
The partition is set up opposite the entrance door. It is generally used to "block" the living room space to a certain extent to prevent the living room area from being separated from the entrance door. The embarrassment of the door being "naked facing each other"...
I think the width of the partition can only cover the furniture opposite the entrance door...
②Construct the foyer " "Partition"
Use furniture, partitions, walls, or a combination of wall partitions to construct a foyer, which "hides" the living room and "defines" the dining room area, which no longer causes entry into the home. The sense of urgency in the district... The partition style that opens the door is the restaurant
I think you can choose the partition that suits the family based on the family space area, functional requirements, decoration style, and personal preferences, but there are too many styles to list them all. A few types are roughly summarized and briefly explained: 1. Functional area "partition"
⑴ "Local materials" style. Sometimes the dining room is "connected" to other functional areas. This functional area can be used as a "partition" by "using local materials". For example, the dining room is "adjacent" to the kitchen, and the kitchen can be transformed into an open plan, with cabinets or entrance doors. Opposite the door, or on one side of the entrance door, it can be used as a "partition"...
⑵ New construction style. Create a new functional area as a "partition" based on the family's functional needs, personal preferences, and space area. Because it is "newly built", you can choose the type of functional area more freely, but you need to pay attention to the height of the part used as a "partition" in the functional area. The "half-height" style will keep the family space "unobstructed", while A "top of the sky" style will make this effect "disappear" and even cause a sense of cramping.
The newly built bar area not only enriches the family's use functions, but also the bar and chandeliers "match each other" and become a "partition" between the restaurant and the entrance area. The space has a strong sense of hierarchy and flexibility. It has a better decorative effect... 2. Storage cabinet partitions
Storage cabinet partitions are used more frequently, and they are also a more practical style to be installed in the entrance area.
⑴ "Entity" formula. "Solid" storage cabinets are used as "partitions". The "top-to-bottom" style will have a good blocking effect on the space. It has a larger storage space and is practical, but it can also easily make a smaller space feel cramped. , so you need to pay attention when choosing; this situation does not exist with shorter "solid" storage cabinets, which bring a better sense of layering to the space, but its blocking and separation effects on the space are "weak" , so you need to choose according to the functional needs of the family. For example, when the cabinet is set on one side of the entrance door to avoid being seen when the door is opened, then a "solid" storage cabinet that "stands up to the sky" will be more suitable. ...
⑵ "Transparent" style. Storage cabinets with good "transparent" effect can effectively avoid the feeling of cramped space, and the "transparent" part of the cabinet can also be used in the dining area and the entrance area at the same time, which is very convenient! 3. Wall partition
⑴ "low wall" style. A "low wall" partition with a certain height not only divides the space into two functional areas on the "ground", but also maintains the "integrity" of the space "above", without affecting the "spacious" effect of the space...
⑵ "High Wall" style.
In addition to the functions of separation and shielding, the "high wall" style partition that reaches the top is, in my opinion, a partition style that is easier to "integrate" with the family space. It can be used with other walls using the same decorative techniques to integrate itself. "Invisible" in the space without being discovered; you can also use materials and shapes different from other walls for "independent decoration", which will become the most beautiful wall in the home, instead of being a "partition"...
"High wall" style partitions will form a more "complete" separation of the space, so I think it is more suitable to be used in larger spaces. When used in smaller spaces, you can reduce its width or match it with wooden, Partitions made of iron or other materials can reduce the sense of oppression it brings to the space. 4. Decorative partitions
Decorative partitions are made of many materials, such as iron, glass, metal, wood, etc. They have almost no practical functions, but their shapes are changeable, their decorative effects are better, and they are more "pure" Partition style. Opening the door is the location where the partition is set up in the restaurant. 1. Dimension value reference
⑴The distance between the partition and the entrance door. The distance between the partition and the entrance door is about 1.2~1.5m, which is more suitable. It will neither feel cramped nor waste space.
⑵The area of the foyer. The area of the foyer is about 3 to 5 square meters, which is more comfortable to use. 2. The "relationship" between the partition and the wall
There are generally two types of "relationship" between the partition and the wall: the wall-facing type and the "off-wall" type. Wall-type partitions are more stable because they rely on the wall; while "off-wall" partitions can be "customer-oriented". Its setting no longer needs to "accommodate" the location of the functional area, but can determine the location of the functional area. It would be a good choice to improve the layout of the home. For example, if the location of the dining area is inappropriate, if partitions are set up at the appropriate location and the dining table is arranged based on the partitions, then the location of the dining area will also be "changed"...
Small expansion: The setting of partitions should also take into account the area required for the restaurant area. The following is a reference for the dimensions of dining tables commonly used in square, round, and rectangular families, as well as the required dimensions of dining chairs and passages (the width of the passage is about 1.2m Can satisfy two people passing at the same time) cannot be ignored.