How to set up wireless bridge in TP-link router is a detailed method.

1. Modify the IP address of the LAN port.

Set the LAN port addresses of two wireless routers to different IP addresses of the same network segment. For example, if the LAN port address of the superior wireless router is192.168.0.1,the LAN port IP address of the wireless router can be set to 192. 168.0.2 (the final value can be 2~254

2. Set the SSID, encryption mode, wireless password and channel of the two wireless routers to be consistent.

3. Set the superior wireless router.

(1) Enter the wireless extension interface of wireless settings, select WDS in wireless extension mode, and click Start Scanning.

(2) Find the SSID of the wireless router in the pop-up dialog box, and then click Connect.

(3) In the key, enter the wireless WiFi password of the router.

4. Set the lower wireless router.

(1) Log in to the setting interface of this wireless router, and refer to Step 3 to add the superior wireless signal;

(2) Disable the DHCP function of the wireless router.

5. After the setting is completed, check the IP address obtained by the computer. When the address of the "default gateway" is the IP address of the LAN port of the superior wireless router (192.168.0.1in this example), the device can surf the Internet.