Where is the water inlet of Honda crv?
This paper mainly introduces the knowledge about where the water inlet of Guandao water tank is and the location of the water inlet of Honda crv water tank. If you need to know more about where the water inlet of Guandao water tank is, please go to Guandao to read more about where the water thermometer is, what water to add to Honda's water tank, and how appropriate the water temperature is.
> The water temperature of Honda Crown Road engine is displayed on the instrument water thermometer, where c stands for 60 degrees, the water temperature mark is 90 degrees, and h stands for 120 degrees. After the engine enters the normal working state, the water temperature should be 85 ~90 degrees, which is just at the water temperature mark shown in the table.
& gt Honda Crown Road has an expansion tank with cooling system in the engine compartment. Whether the cooling water is sufficient can be judged by the coolant level in the expansion tank. Under normal circumstances, the water level of cooling water should be between the highest scale and the lowest scale marked on the expansion tank. When the car is very hot, it is normal that the level of cooling water may be higher than the maximum scale. If the coolant is lower than the minimum scale, add an appropriate amount of cooling water to the expansion tank.
When adding cooling water to Honda Crown Road, the engine should be turned off and in a cooling state, and the cooling water specified by the manufacturer should be used. Don't mix other cooling water, otherwise it may make the cooling water react chemically and fail. Tap water can be added in an emergency, but long-term use will block the water tank and water jacket.
(Photo/Text/Photo: Ask the Beast in China) Ask the World Xpeng Automobile P7 V Chuanqi GS8 P5 Li ONE @20 19.