Is there a floor heating water separator cover? How do people keep the water separator in the bathroom out?

There is a floor heating water separator cover. You can make a very beautiful and easy-to-maintain cabinet as a floor heating water separator cover.

It should be noted that it is best to use PVC as the water separator cover, because the water separator cover made of PVC can not only cover the water separator, but also have the function of the water separator. After all, the bathroom is a place with plenty of water.

Extended data:

Hanging position of geothermal water separator and matters needing attention:

1, the suspension space of water separator should not be too small.

In order to facilitate future maintenance and cleaning, the positions of 10 ~ 15cm should be reserved at both ends of the water separator for maintenance. For example, the water separator is decorated with a buckle cover or hung in a cupboard, and the isolation plates at both ends should not be close to the water separator, so as not to be repaired after problems occur.

2. The closer to the inlet pipe, the better. PPR heating pipes should make as few turns as possible at the inlet and backwater. Because geothermal heating requires high pressure loss of water supply, if the inlet pipeline is too long or turns too much, the pressure loss in the pipeline will be greater, which will affect the water flow speed and reduce the effect of geothermal heating.

3. Stay away from sewers (sewers) or wet areas.

Standard water separators, filters and valves are all made of copper. Its acid and alkali resistance is poor, and the discharge from various sewers is very miscellaneous, which will produce a large number of corrosive gases overflowing from the drain. For example, the water separator is hung near the drain, which is seriously corroded and reduces the service life of the material. In order to increase the risk of water leakage, it is recommended to hang the water separator in a dry position.